35 results (0,17785 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Bi-Metal Holesaw Kit 600L SE IRW10506440

Bi-Metal Holesaw Kit 600L SE IRW10506440

This Irwin Bi-Metal Holesaw Kit is supplied in a uniquely attractive soft storage case incorporating an unbreakable hinge, and internal padding to protect its contents. The case has an integral handle and has a cardboard sleeve containing important product information. The Bi-Metal holesaws cut through a variety of materials, including aluminium, copper, iron, stainless steel, wood and zinc. They have precision set teeth for faster penetration, while the electron beam weld ensures stronger, longer lasting teeth. The bi-metal construction makes these holesaws tough, and durable. This 9-piece set consists of the following 6 x Holesaws 22, 29, 35, 44, 51 and 65mm. 1 x 9.5mm Mandrel for holesaws 14 to 30mm. 1 x 13mm Mandrel for holesaws 32 to 210mm. 1 x Pilot Drill.

GBP 0.00
1

Bi-Metal High Speed Holesaw 140mm IRW10504212

Bi-Metal High Speed Holesaw 140mm IRW10504212

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials including aluminium, copper, iron, stainless steel, wood and zinc.

GBP 0.00
1

Irwin G245/12 Gilbow General Purpose Straight Tin Snips 12"/300mm

Irwin G245/12 Gilbow General Purpose Straight Tin Snips 12"/300mm

Irwin G245/12 Gilbow General Purpose Straight Tin Snips 12 Inch/300mm The Irwin G245/12s are 12 Inch/300mm long Tin Snips referred to as Gilbows. Irwin Gilbow snips and shears have a cutting capability much greater than the strength of the user. The original tin snips were first designed in 1924 and have dominated the sheet metal cutting industry. Features: UNIQUE NON-SLIP JOINT - set and tested for a perfect cut. This should be re-adjusted only after sharpening DOUBLE, HOLLOW GROUND BLADES - reduce friction for easier cutting DROP-FORGED - carbon tool steel handles and blades SAFETY STOP - prevents trapped fingers Specification: Size 12 Inch/300mm

GBP 0.00
1

Irwin HSS Pro TiN Coated Drill Bit (2) 1.0mm OL:34mm WL:12mm

Irwin HSS Pro TiN Coated Drill Bit (2) 1.0mm OL:34mm WL:12mm

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.

GBP 2.29
1

Irwin HSS Pro TiN Coated Drill Bit 3.5mm OL:70mm WL39mm

Irwin HSS Pro TiN Coated Drill Bit 3.5mm OL:70mm WL39mm

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.

GBP 2.65
2

Irwin HSS Pro TiN Coated Drill Bit 5.0mm OL86mm WL52mm IRW10502588

Irwin HSS Pro TiN Coated Drill Bit 5.0mm OL86mm WL52mm IRW10502588

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.

GBP 2.79
1

Irwin HSS Pro TiN Coated Drill Bits (2) 2.0mm OL49mm WL24mm IRW10502574

Irwin HSS Pro TiN Coated Drill Bits (2) 2.0mm OL49mm WL24mm IRW10502574

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.

GBP 2.39
1

Irwin HSS Pro TiN Coated Drill Bits (2) 1.5mm OL:40mm WL:18mm

Irwin HSS Pro TiN Coated Drill Bits (2) 1.5mm OL:40mm WL:18mm

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.

GBP 2.29
1

Irwin HSS Pro TiN Coated Drill Bit 8.5mm OL117mm WL75mm IRW10502596

Irwin HSS Pro TiN Coated Drill Bit 8.5mm OL117mm WL75mm IRW10502596

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.

GBP 4.19
1

Irwin HSS Pro TiN Coated Drill Bit 4.0mm OL75mm WL43mm IRW10502581

Irwin HSS Pro TiN Coated Drill Bit 4.0mm OL75mm WL43mm IRW10502581

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135 split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5 Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is very resistant to wear. TiN has a low coefficient of friction, this results in less power being consumed and less heat generated during the drilling.

GBP 3.09
1