4 results (0,13081 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Faithfull Socket Polarity Tester with RCD Test Function FAIDETSOCRCD

Faithfull Socket Polarity Tester with RCD Test Function FAIDETSOCRCD

The Faithfull Socket Tester is an essential mains safety tester designed for testing socket wiring and RCDs. It will determine whether a socket is wired correctly or incorrectly. Used in conjunction with the coding table provided, the 5 combined indicators show the true status of the sockets wiring condition. It provides a true ground error indication through the LCD if dangerous contact voltage is present at the protective earth (PE). The use of 3 neon indicators for L-N-PE provides rapid detection of correct/incorrect socket wiring. It is equipped with an additional RCD tester for testing the operation of RCDs with a rating of not more than 30mA. Specification Socket Type UK 240V 3-Pin Nominal Voltage 220V & plusmn10% Frequency Range 5060Hz Measurement Category CATIII, 300V RCD Test Time 60300ms Contact Voltage Threshold & lt35 AC against ground depending on coupling to earth RCD Test Current 30mA & plusmn15% Dimensions 77 x 67 x 66mm Weight approx. 70g

GBP 21.99
1

Faithfull VDE Soft Grip Screwdriver Set (Case), 8 Piece FAISDVDESET8

Faithfull VDE Soft Grip Screwdriver Set (Case), 8 Piece FAISDVDESET8

Faithfull VDE Screwdrivers are manufactured to EN 609002004 and individually tested at 10,000V before leaving the factory, guaranteeing a safe working limit of up to 1,000V to provide the maximum level of safety. The screwdrivers feature a two-component, slip-resistant, soft-grip handle with a high quality chrome vanadium steel blade. Each blade is correctly tempered and hardened for high torque and strength. For use on terminal blocks, control cabinets, switches, relays and sockets. Supplied in a durable plastic carry case. This 8 piece set contains the following screwdrivers 1 x Phillips PH1 x 80mm 3 x Pozidriv PZ0 x 60mm, PZ1 x 80mm, and PZ2 x 100mm 3 x Slotted 2.5 x 75mm, 5.5 x 125mm, and 6.5 x 150mm 1 x Mains Tester 100-250V 140mm

GBP 25.99
1

Faithfull Quick Change VDE Screwdriver Set - 13 Piece

Faithfull Quick Change VDE Screwdriver Set - 13 Piece

The Faithfull 13 Piece Quick Change VDE Screwdriver Set.Faithfull VDE screwdrivers are manufactured to BS EN 60900:2012 and are individually tested at 10, 000V in a water bath before leaving the factory. This guarantees you a safe working limit of up to 1, 000V providing the maximum level of safety.The soft grip auto-lock quick release handle allows the blades to be changed quickly and with a minimum of fuss.Stored in a fabric storage wallet which contains:1 x Auto-Locking, Quick Release Soft Grip Handle4 x Slotted Blades: 0.5 x 3 x 100mm, 0.8 x 4 x 100mm, 1 x 5.5 x 100mm and 1.2 x 6.5 x 100mm2 x Phillips Blades: PH1 x 80mm and PH2 x 100mm2 x Pozidriv Blades: PZ1 x 80mm and PZ2 x 100mm3 x Star Blades: TX10 x 100mm, TX15 x 100mm and TX20 x 100mm1 x Single-Pole Voltage/Mains Tester: 3 x 140mm 100-250V (not VDE certified) Specification:Screwdriver Length (inc. handle) : 190/210mm.

GBP 35.99
1

Faithfull Interchangeable VDE Screwdriver Set, 13 Piece FAISDVDES13I

Faithfull Interchangeable VDE Screwdriver Set, 13 Piece FAISDVDES13I

The Faithfull Interchangeable VDE Screwdriver Set offers a neat solution to the problem of both limited space and portability. Many electricians and service engineers are reluctant to take bulky toolboxes around with them as they are often working in restricted areas or are up and down ladders and need their tools readily to hand. The soft grip handle features an automatic locking system a twist to release function allows the blades to be changed quickly with the minimum of fuss. Faithfull VDE screwdrivers are manufactured to BS EN 609002012 and are individually tested at 10,000V in a water bath before leaving the factory. This guarantees a safe working limit of up to 1,000V providing the maximum level of safety. Supplied in a compact storage case with the following 1 x Auto-Locking, Quick Release Soft Grip Handle. 4 x Slotted Blades 0.5 x 3 x 100mm, 0.8 x 4 x 100mm, 1 x 5.5 x 100mm and 1.2 x 6.5 x 100mm. 2 x Phillips Blades PH1 x 80mm and PH2 x 100mm. 2 x Pozidriv Blades PZ1 x 80mm and PZ2 x 100mm. 3 x Star Blades TX10 x 100mm, TX15 x 100mm and TX20 x 100mm. 1 x Single-Pole Voltage/Mains Tester 3 x 140mm 100-250V (not VDE certified). Specification Screwdriver Length (inc. handle) 190/210mm Storage Case Dimensions 210 x 130 x 44mm

GBP 35.99
1