214 results (0,22308 seconds)

Show all filters

Brand

Colour

Show all

Size

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

DeWalt DCK276T2T FlexVolt XR Twin Pack 18V 2 x 18/54V 6.0/2.0Ah Li-ion DEWDCK276T2T

DeWalt DCK276T2T FlexVolt XR Twin Pack 18V 2 x 18/54V 6.0/2.0Ah Li-ion DEWDCK276T2T

The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless.No Load Speed: 0-450/0-1,300/0-2,000/Min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18-54V DCB116 FlexVolt XR Fast Charger that will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4C and 40C. Also supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK Deep Toolbox.

GBP 799.99
1

DeWalt DCK276P2 Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK276P2

DeWalt DCK276P2 Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK276P2

The DEWALT DCK276P2 Brushless Twin Pack, contains the following 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck 13mm Keyless. No Load Speed 0-450/0-1,300/0-2,000/min. Impact Rate 0-8,600/0-25,500/0-38,250/bpm. Max Torque 95Nm, 11 Settings. Capacity Wood 55mm, Steel 15mm, Masonry 16mm Weight 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in). No Load Speed 0-850/0-2,100/0-3,000/min. Impact Rate 0-1,800/0-2,900/0-3,700/bpm. Max Torque 26/80/203Nm. Weight 1.56kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM Toolbox.

GBP 359.99
1

DeWalt DCK266M2T TSTAK Twin Kit 2 x 4.0Ah Li-ion

DeWalt DCK266M2T TSTAK Twin Kit 2 x 4.0Ah Li-ion

The DEWALT DCK266M2T TSTAK Twin Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill which has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless. No Load Speed: 0-550/0-2, 000/min. Impact Rate: 0-9, 350/34, 000/bpm. Torque: 27/70Nm, 15 Settings. Capacity: Masonry/Steel 13mm, Wood 40mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 000/0-2, 800/0-3, 250/min. Impact Rate: 0-1, 800/0-2, 900/0-3, 800/bpm. Max. Torque: 26/80/205Nm. Weight: 1.56kg. Also supplied with: 1 x 10.8-18V DCB115 Multi-Voltage XR Charger, 2 x 18V 4.0Ah Li-ion Batteries and 1 x TSTAK Case.

GBP 0.00
1

DeWalt DCF887P2 XR Brushless 3 Speed Impact Driver 18V 2 x 5.0Ah Li-ion DEWDCF887P2

DeWalt DCF887P2 XR Brushless 3 Speed Impact Driver 18V 2 x 5.0Ah Li-ion DEWDCF887P2

The DEWALT DCF887 XR Brushless Impact Driver is equipped with application control, this is achieved through 3 motor speeds, and torque settings. While Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. The Impact Driver is fitted with a high power, brushless motor capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. The DCF887 XR also has a super lightweight and compact design very comfortable to use, fitting in small spaces. The 3 LED, Halo light ring offers excellent workplace lighting. Specifications; Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg.

GBP 209.99
1

DeWalt DCF887N XR Brushless 3 Speed Impact Driver 18V Bare Unit DEWDCF887N

DeWalt DCF887N XR Brushless 3 Speed Impact Driver 18V Bare Unit DEWDCF887N

The DEWALT DCF887 XR Brushless Impact Driver is equipped with application control, this is achieved through 3 motor speeds, and torque settings. While Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. The Impact Driver is fitted with a high power, brushless motor capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. The DCF887 XR also has a super lightweight and compact design very comfortable to use, fitting in small spaces. The 3 LED, Halo light ring offers excellent workplace lighting. Specifications; Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg.

GBP 79.99
2

DeWalt DCK266P2T XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK266P2T

DeWalt DCK266P2T XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK266P2T

The DEWALT DCK266P2T Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70Nm.Capacity: Wood 40mm, Steel 13mm, Masonry 13mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V.Battery Chemistry: Li-ion.Charging Current: 4.0 A. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK II Toolbox.

GBP 279.99
2

DeWalt DCK266P2 18V XR Combi Drill & Impact Driver Twin Pack (2 x 5.0AH Batteries) in ToughSystem

DeWalt DCK266P2 18V XR Combi Drill & Impact Driver Twin Pack (2 x 5.0AH Batteries) in ToughSystem

Carry out a range of professional tasks with this drill and impact driver set from Dewalt This Dewalt Kit consists of the Dewalt DCD796 Compact Hammer Drill Driver featuring 2nd generation brushless technology for 30% more power and excellent efficiency. The overall length has been reduced to 174mm for an even more compact feel. Also included is the DCF887 Impact Driver which has 205nm of Torque, 28% more powerful than its predecessor the DCF886. Precision drive on speed 1 gives you more control on smaller screws. Comes with 2x 5.0Ah Batteries, Charger and TOUGHSYSTEM Kitbox. DCD796 Features: 3 position super bright LED light Brushless Motor Technology for excellent efficiency Drill Driver and Hammer feature for multiple applications Intelligent trigger design allows for total control of application Ultra-compact, lightweight design allows use in confined spaces Improved airflow to the motor for cooler electronics and increased power Two speed all metal transmission for increased runtime and longer tool life Improved ergonomic design with rubber grip over mould improving users comfort 18V XR Li-Ion compact hammer drill driver featuring NEW 5.0Ah Li-Ion battery technology 15 position adjustable torque control for consistent screw driving into a variety of materials Li-Ion battery packs allows for superior insertion and removal with state of charge indicator Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster DCF887 Features: 3x LED "Halo" light ring offers excellent workpiece lighting 1/4" (6.35mm) 'drop in' bit holder allows for quick, one-handed fitment Super lightweight and compact the tool is very comfortable to use and fits in small spaces Application control is achieved through 3 motor speeds and torque settings including PrecisionDrive PrecisionDrive mode offers additional control in screwdriving applications to avoid material and fastener damage High power Brushless motor outputting up to 205Nm of torque ensures heavy applications are completed quickly 5.0Ah XR battery packs offer great runtime and compatibility with all of your other 18V XR DEWALT Power Tools Comes With: TOUGHSYSTEM kitbox Multi-voltage XR charger 2x 5.0Ah XR Li-Ion battery packs with state of charge indicator Specification: DCD796 Width: 67 mm Weight: 1.8 kg Height: 203 mm Length: 174 mm Power Output: 460 Watt Sound Power: 100 dB(A) Sound Pressure: 89 dB(A) Max Torque (Soft): 27 Nm Max Torque (Hard): 70 Nm Chuck Capacity: 1.5-13 mm No Load Speed: 0-550/2000 rpm Sound Power Uncertainty: 3 dB(A) Uncertainty K 1 (Vibration): 1.5 m/s_ Uncertainty K 2 (Vibration): 1.6 m/s_ Uncertainty K 3 (Vibration): 1.5 m/s_ Sound Pressure Uncertainty: 3 dB(A) Max. Drilling Capacity [Metal]: 13mm Max. Drilling Capacity [Wood]: 40mm Beats per Minute: 0-9350/34000 bpm Max. Drilling Capacity [Masonry]: 13mm Hand/Arm Vibration - Drilling into metal:

GBP 309.99
3

DeWalt DCK368P3T XR Brushless Kit 18V 3 x 18V 5.0Ah Li-ion DEWDCK368P3T

DeWalt DCK368P3T XR Brushless Kit 18V 3 x 18V 5.0Ah Li-ion DEWDCK368P3T

The DEWALT DCK368P3T XR Brushless 3 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel 13mm, Masonry 13mm, Wood 40mm.Weight: 1.3kg. 1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18V DCH273 Brushless XR 3 Mode SDS Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mm.Weight: 3.1kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK II Toolboxes.

GBP 599.99
1

DeWalt DCD996P2 XR Brushless Combi Drill 18V 2 x 5.0Ah Li-ion DEWDCD996P2

DeWalt DCD996P2 XR Brushless Combi Drill 18V 2 x 5.0Ah Li-ion DEWDCD996P2

The DEWALT DCD996 XR Brushless Combi Drill has a tough 3-speed all-metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the user's masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark workspaces. The grip design provides greater application control and maximum comfort. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max. Torque: 95Nm, 11 Settings.Capacity: Masonry 16mm, Steel 15mm, Wood 55mm.Weight: 2.1kg.

GBP 299.99
1

DeWalt DCD996N XR Brushless Combi Drill 18V Bare Unit

DeWalt DCD996N XR Brushless Combi Drill 18V Bare Unit

The DEWALT DCD996 XR Brushless Combi Drill has a tough 3-speed all-metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the user's masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark workspaces. The grip design provides greater application control and maximum comfort. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max. Torque: 95Nm, 11 Settings.Capacity: Masonry 16mm, Steel 15mm, Wood 55mm.Weight: 2.1kg.

GBP 119.99
1

DeWalt DCD996X1 XR Brushless Combi Drill 18V 1 x 9.0/3.0Ah FlexVolt Li-ion DEWDCD996X1

DeWalt DCD996X1 XR Brushless Combi Drill 18V 1 x 9.0/3.0Ah FlexVolt Li-ion DEWDCD996X1

The DEWALT DCD996 XR Brushless Combi Drill has a tough 3-speed all-metal transmission for increased run time and longer tool life. It features an improved automatic high speed for increasing the user's masonry drilling speed. The electronic clutch has an 11 position adjustable torque control for optimised precision when screwdriving. The hammer drill driver has a 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes and an efficient intelligent trigger allowing total control over all applications. With an improved 3 position LED torch with high/medium/low settings. The high output provides a 20 minute LED delay for lighting dark workspaces. The grip design provides greater application control and maximum comfort. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max. Torque: 95Nm, 11 Settings.Capacity: Masonry 16mm, Steel 15mm, Wood 55mm.Weight: 2.1kg.

GBP 269.99
2

DeWalt DCK2200H2T Powerstack Twin Pack 18V 2 x 5.0Ah Li-ion

DeWalt DCK2200H2T Powerstack Twin Pack 18V 2 x 5.0Ah Li-ion

The DEWALT DCK2200H2T POWERSTACK Twin Pack, contains the following:1 x18V DCD1007 Hammer Drill with a brushless motor, 3-speed transmission and electronic torque control. The variable speed trigger enables precise control. The Perform Protect E-Clutch system which will shut down the tool if it detects any kind of bind up situation. This protects the tool from overloading.Chuck: 13mmNo Load Speed: 0-450/0-1200/0-2000/min.Impact Rate: 0-8, 500/0-2, 210/0-38, 250/bpmMax. Torque: 169NmCapacity: Steel 12.7mm, Masonry 12.7mm, Wood 38mmWeight: 1.87kg (without battery) 1 x18V DCF860 E2T XR Impact Driver with a brushless motor delivers high performance, extends tool life and allows for a much shorter design. The Drop Load bit holder allows for easy, one-handed operation. Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. The super bright 9 LED ring delivers 82 lumens and features a flashlight mode.Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 800/0-2, 800/0-3, 800/min.Impact Rate: 0-4, 400/bpmMax. Torque: 282NmWeight: 1.09kg (without battery) 1 x 12-18V DCB1104 Multi-Voltage Charger. A versatile and compact solution for all your charging needs. It charges all DEWALT 12V and 18V Li-ion batteries, ensuring your tools are always ready when you are. The State of Charge (SOC) indication provides clear and accurate information on the charging status of your batteries, indicating when they reach 80% and 100% charge. This allows you to plan your work more effectively, reducing downtime and increasing productivity.Also supplied with:2 x 18V POWERSTACK Slide Batteries 5.0Ah Li-ion and 1 x TSTAK Case.

GBP 669.99
1

DeWalt DCD1007H2T Hammer Drill 18V 2 x 5.0Ah Powerstack Li-ion

DeWalt DCD1007H2T Hammer Drill 18V 2 x 5.0Ah Powerstack Li-ion

The DEWALT DCD1007 Hammer Drill has a brushless motor which delivers enhanced efficiency as well as durability. Delivers precise control via a variable speed trigger. The 3-speed transmission and electronic torque control lets you customise the performance, so you always get the right setting for drilling and screwdriving. Its compact design incorporates a comfortable and ergonomic grip design. The Perform Protect E-Clutch system which will shut down the tool if it detects any kind of bind up situation. This protects the tool from overloading. There is also a handy LED work light, enabling work in any lighting condition. Supplied with: 1 x Side Handle.2 x 18V 5.0Ah POWERSTACK Li-ion Batteries.1 x DCB1104 Battery Charger.1 x TSTAK Case. Specifications: Chuck: 13mm.No Load Speed: 0-450/0-1200/0-2000/min. Impact Rate: 0-8, 500/0-2, 210/0-38, 250/bpm.Max. Torque: 169Nm.Capacity: Steel 12.7mm, Masonry 12.7mm, Wood 38mm.Weight: 1.87kg (without battery) .

GBP 529.99
1

DeWalt DCK2062M2T XR Brushless Compact Twin Pack 18V 2 X 4.0AH Li-ion

DeWalt DCK2062M2T XR Brushless Compact Twin Pack 18V 2 X 4.0AH Li-ion

The DEWALT DCK2062M2T XR Brushless Twin Pack, contains the following: 1 x 18V DCD709 XR Brushless Combi Drill has an overall head length of just 180mm, allowing you to get into the smallest of spaces. Fitted with an ergonomically designed handle for optimum comfort and control. Chuck: 13mmNo Load Speed: 0-450/0-1,650/min.Impact Rate: 0-7,650/0-28,050/bpmMax. Torque: 65Nm, 15 Settings #43; DrillCapacity: Wood 30mm, Steel 13mm, Masonry 13mm 1 x 18V DCF809 XR Brushless Impact Driver is super compact at only 130mm in length, allowing you to get into even smaller spaces than most other impact drivers. Fitted with an ergonomically designed handle for optimum comfort and control. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,800/min.Impact Rate: 0-32,000/bpmMax. Torque: 190Nm Also supplied with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

GBP 329.99
1

DeWalt DCK2110L2 XR Brushless Sub-Compact Twin Pack 12V 2 x 3.0Ah Li-ion DEWDCK2110L2

DeWalt DCK2110L2 XR Brushless Sub-Compact Twin Pack 12V 2 x 3.0Ah Li-ion DEWDCK2110L2

The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck 10mm Keyless No Load Speed 0-425/0-1,500/min. Max. Torque 57.5Nm, 15 Settings Capacity Wood 20mm Weight 0.9kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed 0-950/0-1,950/0-2,850/min. Impact Rate 0-3,600/bpm Max. Torque 163Nm Bare Unit Weight 0.8kg Also supplied with 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

GBP 229.99
1

DeWalt Multi Tool Rigid 52mm Wide Scraper Blade DT20714

DeWalt Multi Tool Rigid 52mm Wide Scraper Blade DT20714

DT20714 Multi Tool Rigid Scraper Blade. This DeWalt Scraper blade is suitable for the DWE315 corded multi tool or the DCS355 cordless multi tool. The multi-fit capability ensures this blade is also suitable for a wide variety of other multi tools from brands such as Bosch, Makita and Milwaukee. Features and benefits Multi tool Rigid Scraper blade for excellent surface removal on a wide range of materials Accessories fit all common oscillating tools Enables quick & easy blade changes Notes Width 52mm

GBP 5.69
1

DeWalt DCF840N XR Impact Driver 18V Bare Unit

DeWalt DCF840N XR Impact Driver 18V Bare Unit

DEWALT DCF840 XR Impact Driver with a high-power, brushless motor capable of outputting up to 192Nm of torque, ensuring heavy applications are completed quickly. Its compact design makes it ideal for a wide range of applications in construction, industrial and automotive environments. The LED ring light delivers the best visibility in the toughest environments. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Bit Holder: 6.35mm (1/4in) . No Load Speed: 0-3, 200/min. Impact Rate: 0-4, 200/bpm. Max. Torque: 192Nm. Weight: 0.88kg (without battery) . Technical Specs Bit Holder: 6.35mm (1/4in) No Load Speed: 0-3, 200/min. Impact Rate: 0-4, 200/bpm Max. Torque: 192Nm Weight: 0.88kg (without battery)

GBP 249.99
1

DeWalt DCH253M2 SDS Plus Rotary Hammer 18V 2 x 4.0Ah Li-ion DEWDCH253M2

DeWalt DCH253M2 SDS Plus Rotary Hammer 18V 2 x 4.0Ah Li-ion DEWDCH253M2

The DEWALT DCH253 18V SDS Plus Rotary Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18V Lithium-ion batteries to deliver high performance, long life and maximum runtime. The DCH253 features best in class vibration (6.6m/s) to reduce user fatigue and maximise operating periods. A bright white LED with delay feature improves visibility. Specifications: Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/bpm.Impact Energy: 2.1 joules.Capacity: Concrete: 24mm, Steel:13mm, Wood: 26mm.Weight 3.1kg.

GBP 339.99
2

DeWalt DCF887M1 XR Impact Driver 18V 1 x 4.0AH Li-ion

DeWalt DCF887M1 XR Impact Driver 18V 1 x 4.0AH Li-ion

The DEWALT DCF887M1 XR Impact Driver is equipped with application control, 3 motor speeds and torque settings. Precision drive mode offers additional control in screwdriving applications to avoid material and fastener damage. Fitted with a high-power, brushless motor that is capable of outputting up to 205Nm of torque, ensuring heavy applications are completed quickly. It has a super lightweight and compact design and a 3 LED, halo light ring. Supplied with: 1 x 18V 4.0Ah Li-ion Battery, 1 x Belt Hook, 1 x Magnetic Bit Holder, 1 x Multi-Voltage XR Charger and 1 x Toolbox. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-3,800/bpmMax. Torque: 205NmCapacity: Bolt M12Weight: 1.34kg

GBP 149.99
1

DCK305P2T XR Brushless Triple Kit 18V 2 x 5.0Ah Li-ion DEWDCK305P2T

DCK305P2T XR Brushless Triple Kit 18V 2 x 5.0Ah Li-ion DEWDCK305P2T

The DEWALT DCK305P2T XR Brushless Triple Kit, contains the following 1 x 18V DCH273P2 XR Brushless 3 Mode Hammer, fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes Rotary, SDS Hammer, Chisel Only No Load Speed 0-1,100/min. Impact Rate 0-4,600/bpm with 2.1 joules Capacity Wood 26mm, Metal 13mm, Masonry 24mm Weight 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver, equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in) No Load Speed 0-1,000/0-2,800/0-3,250/min. Impact Rate 0-1,800/0-2,900/0-3,800/bpm Max. Torque 26/80/205Nm Weight 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed 9,000/min. Disc Diameter 125mm, M14 Spindle Weight 1.75kg Also supplied with 2 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger, 1 x TSTAK II and 1 x TSTAK VI Deep Toolbox.

GBP 0.00
1

DeWalt DT20715 Multi-Tool Accessory Blade Set, 5 Piece DEWDT20715

DeWalt DT20715 Multi-Tool Accessory Blade Set, 5 Piece DEWDT20715

The DEWALT DT20715 Multi-Tool Accessory Blade Set covers a wide number of cutting and scraping tasks. These blades have a multi-fit design, making them suitable for other brands of multi tool including Bosch, Fein (Not Supercut), Makita and Milwaukee (excluding Starlock). Supplied in DEWALT branded case, contains 2 x DT20701 Multi-Tool Wood & Nails Blades 43 x 30mm 1 x DT20704 Multi-Tool Fast Cut Wood Blade 43 x 30mm 1 x Multi-Tool Titanium Flush Cut Blade 100mm 1 x DT20714 Multi-Tool Rigid Scraper Blade

GBP 0.00
1

DeWalt DT20706 Bi-Metal Detail Multi-tool Saw Blade 43mm x 10mm

DeWalt DT20706 Bi-Metal Detail Multi-tool Saw Blade 43mm x 10mm

Dewalt DT20706 Bi-Metal Detail Multi-Tool Saw Blade 43mm x 10mm The Dewalt DT20706 fits most common oscillating multi-tools including Dewalt, Bosch, Fein, Makita and Milwaukee. It is designed for detailed cuts in wood, PVC, and drywall. It has a cutting depth of 43mm and a blade width of 10mm with 18 teeth per inch. Features: Cut-outs and recesses in wood, plastic and plasterboard Dust extraction capability, when attached to a separate dust extraction unit, to minimise dust pollution when sanding Specification: Blade Length: 43mm Blade Width: 10mm Teeth: 18tpi

GBP 7.49
1

DeWalt DCK755P3T XR Brushless 7 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK755P3T

DeWalt DCK755P3T XR Brushless 7 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK755P3T

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Torque: 27/70Nm, 15 Settings.Capacity: Steel 13mm, Masonry 13mm, Wood 40mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg. 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90 64mmBlade: 184 x 16mm BoreBevel Capacity: 57 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45 in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK VI Deep Toolboxes (171195), 1 x TSTAK II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK Carrier Base (171229)

GBP 0.00
1