18 results (0,13585 seconds)

Show all filters

Brand

Colour

Size

Gender

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Ambersil Dry Film Anti Stick 400ml - AMB31573

Ambersil Dry Film Anti Stick 400ml - AMB31573

DRY FILM ANTI-STICK SPRAY is a specialist surface coating with excellent anti-stick and lubricating properties. It is based on a special resin bonded PTFE system which has been formulated for applications where the use of wet or silicone based products is undesirable. Applications Forms a dry - non-staining film which makes it ideal for use in the: Food Paper Textile and Plastics Manufacturing industries Where direct contact is involved with surfaces which would be contaminated by wet or silicone based products.The dry lubricating film is unaffected by water oil or solvents and offers excellent friction retardant properties. The product is also suitable for use as a mould release agent* and electrical anti-tracking agent.* N.B. The product is completely free of silicons and will therefore allow decorative treatment (e.g. painting - plating) of any moulded parts.Apply a light - even coating from 9 - 12 inches (25 - 30 cm) Re-apply as necessary.Caution. Do not smoke during the use of this product and avoid contamination of tobacco. If sprayed onto hot surfaces or if coating is heated (over 230C) - ensure local exhaust ventilation is applied and avoid inhalation of fumes. Wash hands after use Appearance : Opaque liquid Odour : Mild Solvent SG @ 25C : 0.89 Pressure @ 25C : 3.5 Bar Discharge rate : 1.0 - 1.1 g/sec Temperature range : Operational from -100C to +200c Solubility : Insoluble in water and most solvents Flammability : Classified as extremely flammable under current EC Regulations Flashpoint : Not applicable in sealed aerosol Packaging : 400 ml aerosol Storage The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame. Specifications: Brand AMBERSIL MPN 1031010 Weight (kg) 0.35

GBP 51.99
1

Ambersil PTFE Lubricant, Concentrated Dry Film, Anti-stick, 400ML

Ambersil PTFE Lubricant, Concentrated Dry Film, Anti-stick, 400ML

A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components. Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts.

GBP 19.99
1

Ambersil Formula 6 Silicone Release Agent, Medium Duty, 25LTR

Ambersil Formula 6 Silicone Release Agent, Medium Duty, 25LTR

Formula 6 Silicone Release Agent is a general purpose release agent for all thermoplastics and many types of rubber. It helps ensure accurate mould detailing and improved surface finishing whilst also being suitable for use as an anti-stick agent in the textile, printing and shoe industries. Features and Benefits Highly versatile ensures accurate mould detail and improving surface finish Resists building up in the mould Can be used as an anti-sticking agent in the textile, printing and shoe industries Improves surface finish, minimises imperfections Good maximum operating temperature up to +200C Typical Applications Textile industry Foam converting industry Printing industry Shoe industries

GBP 209.99
1

Ambersil HD-Sil Release 500ml - AMB32353 - Pack of 6

Ambersil HD-Sil Release 500ml - AMB32353 - Pack of 6

Ambersil Silicone Mould Release Agent The Ambersil 500ml silicone mould release agent is formulated to provide quick and effective release of rigid, integral skin and elastomeric polyurethane. It also provides effective release of epoxy, polyester, PVC and many other plastics and rubbers. Features and Benefits Does not build up in the mould Provides a high gloss finish to moulded parts Operational up to 200C Exhibits excellent anti-stick and slip properties Ideal for use where a clean, colourless lubricant is required Applications Foam conversion Chutes Conveyors Paper Textile Certifications ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007 Specifications: Brand AMBERSIL MPN 1031422 Weight (kg) 0.44

GBP 69.99
1

Ambersil Formula 6 Silicone Release Agent, Medium Duty, 400ML

Ambersil Formula 6 Silicone Release Agent, Medium Duty, 400ML

Formula 6 Silicone Release Agent is a general purpose release agent for all thermoplastics and many types of rubber. It helps ensure accurate mould detailing and improved surface finishing whilst also being suitable for use as an anti-stick agent in the textile, printing and shoe industries. Features and Benefits Highly versatile ensures accurate mould detail and improving surface finish Resists building up in the mould Can be used as an anti-sticking agent in the textile, printing and shoe industries Improves surface finish, minimises imperfections Good maximum operating temperature up to +200C Typical Applications Textile industry Foam converting industry Printing industry Shoe industries

GBP 14.39
1

Formula 6 Medium Duty Silicon Release Agent 25 Litres

Formula 6 Medium Duty Silicon Release Agent 25 Litres

Formula six release agent from Ambersil is a highly versatile formula that's suitable for use on thermoplastics and many types of rubber mould. Features and Benefits Ensures accurate mould detail is achieved Improves the surface finish of the mould Won't 'build-up' inside the mould to avoid regular cleaning Minimises mould imperfections for excellent results Enhances tool releasing Aerosol packaging has a 360 degree system to spray from all angles for consistent coverage Typical Applications Injection moulding Compression moulding Vacuum forming Anti-stick agent in printing and shoe industries Standards ISO 14001 ISO 9001 Warnings Extremely flammable. Remove all sources of ignition before use Contains silicone. Unsuitable for use near painting and plating applications

GBP 169.99
1

Ambersil Direct Contact Food Lube FG 400ml - AMB33367

Ambersil Direct Contact Food Lube FG 400ml - AMB33367

Direct Contact Food Lube FG is an NSF registered 3H & H1 high performance, direct food contact release agent and extremely effective multi-purpose lubricant for use on food processing equipment where incidental food contact may occur. Suitable for use at mixing paddles, oven trays & pans, conveyor surfaces (all types), food forms & trays, hooks, cutting blades, slicing machines, mincers, saw blades. Features: 400ml fill size NSF registered: 3H and H1 (165196) Non-toxic, minimal odour, and safe for use in food production areas Perma-lock actuator for maximum safety Use as an anti-stick release agent to prevent food adhering to surfaces Provides long-term, stable lubrication of moving parts Protects against corrosion Halal certified Does not contain silicone Specifications: Brand AMBERSIL MPN 1032739 Weight (kg) 0.354

GBP 36.99
1

Ambersil Dry PTFE Lube FG 400ml - AMB31589 - Pack of 2

Ambersil Dry PTFE Lube FG 400ml - AMB31589 - Pack of 2

DRY PTFE LUBE FG is a multi purpose dry film PTFE lubricant suitable for use in food processing industries. The lubricant is NSF H1 registered (No. 139899) and forms a clean - dry film with effective anti-stick properties - low environmental dust/dirt adherence and good resistance to water - oils and solvents. APPLICATIONS Forms a dry - non-toxic colourless film for the light lubrication of: Chutes Slides Pins and More Particularly suitable in low load low speed applications. Apply a light - even coating from 6 - 10 inches (15 - 25 cm) Re-apply as necessary. Caution: Do not smoke during the use of this product and avoid the contamination of tobacco. If sprayed onto hot surfaces or if the coating is heated (over 230C) ensure local exhaust ventilation is applied and avoid inhalation of fumes. Wash hands well after use Specifications: Brand AMBERSIL MPN 1031037 Weight (kg) 0.34

GBP 52.99
1

Ambersil Formula Eight 400ml - AMB31536 - Pack of 4

Ambersil Formula Eight 400ml - AMB31536 - Pack of 4

FORMULA EIGHT is a multi-purpose - light duty silicone mould release agent. It provides a highly effective yet economical solution to release problems on many types of plastics and rubber moulding and forming processes. Provides a light duty film for release of fine detail plastic and rubber parts in: Injection moulding Compression moulding and Vacuum forming processes Will not build up in the mould and helps to improve surface finish - reduces rejects and increases production. Also useful as an anti-stick agent in the: Textiles Foam converting Shoe and Foundry industries N.B. Contains silicone so may be unsuitable where decorative work (e.g. painting - plating) is necessary on the moulded part. If a non-silicone product is required use Formula Five.Spray a light - even coating from 9 - 12 inches (25 - 30 cm) and re-apply as necessary. Specifications: Brand AMBERSIL MPN 1030951 Weight (kg) 0.25

GBP 102.99
1