31 resultater (0,25722 sekunder)

Vis alle filtre

Mærke

Farve

Vis alle

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Solid Paper Holder With Lid - Brushed Stainless Steel Finish

Solid Paper Holder With Lid - Brushed Stainless Steel Finish

Solid is a series of bathroom accessories that are made of solid brass and have a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid toilet roll holder is available in two different designs; chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1

Towel Hook Solid 4-Hook - Chrome

Towel Hook Solid 4-Hook - Chrome

Solid is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid 4-hook is available in two different designs; Chrome & brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 9.60
1

Towel Hook Base 200 2-Hook - Polished Brass

Towel Hook Base 200 2-Hook - Polished Brass

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 2-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 14.90
1

Towel Hook Base 200 2-Hook - Chrome

Towel Hook Base 200 2-Hook - Chrome

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 2-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1

Base 100 Spare Paper Holder - Brushed Stainless Steel

Base 100 Spare Paper Holder - Brushed Stainless Steel

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 100 spare paper holder is available in two different designs; Chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 15.33
1

Towel Hook Base 100 2-Hook - Chrome

Towel Hook Base 100 2-Hook - Chrome

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 100 2-hook is available in two different designs; Chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1

Towel Hook Base 200 2-Hook - Brushed Stainless Steel Finish

Towel Hook Base 200 2-Hook - Brushed Stainless Steel Finish

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 2-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1

Towel Hook Base 100 2-Hook - Brushed Stainless Steel Finish

Towel Hook Base 100 2-Hook - Brushed Stainless Steel Finish

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 100 2-hook is available in two different designs; Chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1

Base 100 Spare Paper Holder - Chrome

Base 100 Spare Paper Holder - Chrome

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 100 spare paper holder is available in two different designs; Chrome and brushed stainless steel.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 15.33
1

Towel Hook Base 200 2-Hook - Matte Black

Towel Hook Base 200 2-Hook - Matte Black

Base is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Base 200 2-hook is available in four different designs; Chrome, brushed stainless steel, matte black and brass.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 12.90
1

Hook Switch - White

Hook Switch - White

Switch is a minimalist hook that becomes part of the wall it is attached to. Its simple design is reminiscent of a switch, a triangular shape with flat surfaces creates endless mounting possibilities.The hook is self-adhesive and is attached with 3M tape. Switch can be attached to smooth surfaces, such as doors, and tiles in the bathroom and kitchen, but also smooth surfaces in the wardrobe, such as wardrobe doors and drawers and smooth walls.Switch is available in four different designs, walnut, oak, black, and white.This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 12.82
1

Hook Switch - Oak

Hook Switch - Oak

Switch is a minimalist hook that becomes part of the wall it is attached to. Its simple design is reminiscent of a switch, a triangular shape with flat surfaces creates endless mounting possibilities.The hook is self-adhesive and is attached with 3M tape. Switch can be attached to smooth surfaces, such as doors, and tiles in the bathroom and kitchen, but also smooth surfaces in the wardrobe, such as wardrobe doors and drawers and smooth walls.Switch is available in four different designs, walnut, oak, black, and white.This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 15.50
1

Hook Switch - Black

Hook Switch - Black

Switch is a minimalist hook that becomes part of the wall it is attached to. Its simple design is reminiscent of a switch, a triangular shape with flat surfaces creates endless mounting possibilities.The hook is self-adhesive and is attached with 3M tape. Switch can be attached to smooth surfaces, such as doors, and tiles in the bathroom and kitchen, but also smooth surfaces in the wardrobe, such as wardrobe doors and drawers and smooth walls.Switch is available in four different designs, walnut, oak, black, and white.This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 17.10
1

Solid Towel Rail - Brushed Stainless Steel

Solid Towel Rail - Brushed Stainless Steel

Solid is a series of bathroom accessories that are completely made of stainless steel and has a self-adhesive tape on the back which makes the assembly simple and it is mounted without drilling. Solid towel rail is available in two different designs; Chrome and brushed stainless steel.The towel rack has two adherences, in order for the towel rack to achieve the best possible adhesive ability it is important that the surface which the towel rack is to be mounted on, is smooth. In the case that the two different adherences are to be mounted on two different tiles, it is extra important to check that the tiles are leveled.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 11.97
1

Hook Tok - Matte Pink

Hook Tok - Matte Pink

Tok is a series of hooks in playful colors and its shape gives the hook a timelessness. The hook is available in six different designs, which creates endless design possibilities to fill your walls with colour, colour, colour! Mix and match different designs or install several hooks of the same design in line with each other.Perfect hooks for children's rooms, the colorful home or to give the stylish home a lovely splash of colour.The Tok hooks are self-adhesive and are attached with 3M tape. The hooks are made of aluminum, which gives the hook a luxurious and solid feeling of quality.Tok is available in six different designs with a matte finish; yellow, pink, grey, black, white and turquoise.This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 12.10
1

Towel Hook Base 220 2-Hook - Polished Brass

Towel Hook Base 220 2-Hook - Polished Brass

Base 220 2-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 220 hooks is available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matte black, brushed stainless steel, polished brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Hooks for both the towel and the bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 14.90
1

Hook Tok - Matte White

Hook Tok - Matte White

Tok is a series of hooks in playful colors and its shape gives the hook a timelessness. The hook is available in six different designs, which creates endless design possibilities to fill your walls with colour, colour, colour! Mix and match different designs or install several hooks of the same design in line with each other.Perfect hooks for children's rooms, the colorful home or to give the stylish home a lovely splash of colour.The Tok hooks are self-adhesive and are attached with 3M tape. The hooks are made of aluminum, which gives the hook a luxurious and solid feeling of quality.Tok is available in six different designs with a matte finish; yellow, pink, grey, black, white and turquoise.This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 12.10
1

Towel Hook Base 220 2-Hook - Brushed Stainless Steel Finish

Towel Hook Base 220 2-Hook - Brushed Stainless Steel Finish

Base 220 2-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 220 hooks is available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matt black, brushed stainless steel, brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Hooks for both the towel and the bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 13.90
1

Hook Tok - Matte Black

Hook Tok - Matte Black

Tok is a series of hooks in playful colors and its shape gives the hook a timelessness. The hook is available in six different designs, which creates endless design possibilities to fill your walls with colour, colour, colour! Mix and match different designs or install several hooks of the same design in line with each other.Perfect hooks for children's rooms, the colorful home or to give the stylish home a lovely splash of colour.The Tok hooks are self-adhesive and are attached with 3M tape. The hooks are made of aluminum, which gives the hook a luxurious and solid feeling of quality.Tok is available in six different designs with a matte finish; yellow, pink, grey, black, white and turquoise.This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 12.10
1

Towel Hook Base 220 2-Hook - Matte Black

Towel Hook Base 220 2-Hook - Matte Black

Base 220 2-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 220 hooks is available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matte black, brushed stainless steel, brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Hooks for both the towel and the bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 13.90
1

Towel Hook Base 220 2-Hook - Chrome

Towel Hook Base 220 2-Hook - Chrome

Base 220 2-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 220 hooks is available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matt black, brushed stainless steel, brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Hooks for both the towel and the bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Apply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven / rough surfaces where the tape does not get full contact or surfaces that can screw up such as wet room wallpaper. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no joint adhesive remains on the mounting surface.

GBP 13.90
1

Hook Tok - Matte Yellow

Hook Tok - Matte Yellow

Tok is a series of hooks in playful colors and its shape gives the hook a timelessness. The hook is available in six different designs, which creates endless design possibilities to fill your walls with colour, colour, colour! Mix and match different designs or install several hooks of the same design in line with each other.Perfect hooks for children's rooms, the colorful home or to give the stylish home a lovely splash of colour.The Tok hooks are self-adhesive and are attached with 3M tape. The hooks are made of aluminum, which gives the hook a luxurious and solid feeling of quality.Tok is available in six different designs with a matte finish; yellow, pink, grey, black, white and turquoise.This hook is included in BO Selection. A unique selection of interior details that can only be purchased at Beslag Online.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 12.10
1

Towel Hook Base 220 1-Hook - Polished Brass

Towel Hook Base 220 1-Hook - Polished Brass

Base 220 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back which facilitates installation, without you having to drill. Base 220 1-hook is available in four versions; matt black, brushed stainless steel, chrome and polished brass.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. Base 220 1-hook is the hook for the towel or bathrobe. The rounded edges of the back plate create a soft and harmonious feeling, while its straight, vertical placement and round shape create attitude and a stylish design. The vertical part at the far end of the hook creates a nice finish but is also practical because it helps to keep the towel in place without falling down.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: When cleaning the product, use a clean, damp cloth.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 8.90
1

Towel Hook Base 210 1-Hook - Matte Black

Towel Hook Base 210 1-Hook - Matte Black

Base 210 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 210 hooks are available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matt black, brushed stainless steel, brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. The hook for the towel or bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 8.90
1

Towel Hook Base 210 1-Hook - Polished Brass

Towel Hook Base 210 1-Hook - Polished Brass

Base 210 1-hook is part of the Base series from Beslag Design, the series contains bathroom accessories made entirely of stainless steel and all products have a self-adhesive tape on the back, which facilitates installation, without you having to drill. Base 210 hooks are available in three sizes; 1-hook, 2-hook and 3-hook and four designs; matt black, brushed stainless steel, polished brass and chrome.The 3M tape on the back of the product creates endless possibilities for quick change in your bathroom, we have interior details that are both stylish and practical. The hook for the towel or bathrobe. The rounded edges of the back plate create a soft feeling and the circular details at the far end of the hook create a stylish design, but are also practical as, for example, the towel does not fall down as easily when suspended.Installation Instructions:Thoroughly clean the surface with a 3M surface cleaning sachet, click here to find the product.Remove the protective film.Aapply the product by pressing it against the substrate for 10 seconds.For optimal adhesion allow the adhesive to cure 24 hours before the product is loaded.Cleaning: Use a clean, damp cloth when cleaning the product.NOTE! Attached to durable smooth surfaces such as tiles, lacquered or veneered board materials, etc. It is not appropriate to attach the products to uneven/rough surfaces where the tape does not get full contact or surfaces that can screw up such as bathroom wallpaper. We do not recommend mounting the product over the grout as this affects the adhesion of the 3M tape. On newly tiled walls, it is important that the surface is thoroughly cleaned so that no grout adhesive remains on the mounting surface.

GBP 9.90
1