2.013 resultater (0,28626 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

Brodit Monteringstilbehør Flex arm 25cm - 215407

Brodit Monteringstilbehør Flex arm 25cm - 215407

Smart Flex arm på 25 cm Monteringstilbehør fra Brodit Farve: Sort Indhold: 25 cm lang flex arm Praktisk flex arm med AMPS plade i begge ender til montering af tungere udstyr såsom skærme, printere scannere mm. i eksempelvis busser, varebiler, trucks mm. Armen skrues fast på eksempelvis en Brodit proclip. Se vores udvalg af bilspecifikke Proclips og bilbeslag lige her - Proclips beslag og Dashmounts Model: 215407 EAN: 7320282151812

DKK 399.00
1

Brodit Monteringstilbehør Flex arm 15cm - 215181

Brodit Monteringstilbehør Flex arm 15cm - 215181

Smart Flex arm på 15 cm Monteringstilbehør fra Brodit Farve: Sort Indhold: 15 cm lang flex arm Praktisk flex arm med AMPS plade i begge ender til montering af tungere udstyr såsom skærme, printere scannere mm. i eksempelvis busser, varebiler, trucks mm. Armen skrues fast på eksempelvis en Brodit proclip. Se vores udvalg af bilspecifikke Proclips og bilbeslag lige her - Proclips beslag og Dashmounts Model: 215181 EAN: 7320282151812

DKK 339.00
1

Brodit Aktiv Holder med cigaradaptor til Zodiac Freetalk Pro/Flex - 982491

Brodit Aktiv Holder med cigaradaptor til Zodiac Freetalk Pro/Flex - 982491

#html-body [data-pb-style=HSQMWCU]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugThe Vehicle Charging Cradle is custom made for a perfect fit. The cradle holds a two-way radio in an upright position for better reception. Each has a cigarette lighter charging cord permanently attached to the cradle with built in contact points for the battery. Utilizing a Delta-V charging technique, the cradle provides rapid and trickle charging. Each cradle has a number of features such as a security timer, overheat sensor, and LED indicator to show that charging is in progress. The indicator changes from red to green when fully charged. Attach onto a ProClip Mounting Platform.Fits the following modelsZodiac Freetalk Pro/Flex 

DKK 979.00
1

Brodit Proclip Monteringsbeslag - Ford Flex 2009-2012

Brodit Proclip Monteringsbeslag - Ford Flex 2009-2012

Smart Proclip bilbeslag fra kendte Brodit. ProClip er et monterings beslag til din bils instrumentbræt. På en Brodit ProClip kan du installere f.eks en holder til din smartphone, GPS eller tablet. Bil beslaget er lavet specifikt til den enkelte bil model og årgang hvilket sikrer at den sidder sikkert og altid inden for rækkevidde. ProClip er let at installere. Installationen er hurtig, ingen specielle værktøjer eller afmontering af instrumentbrættet er påkrævet, og beslaget skader ikke instrumentbrættet og kan fjernes igen uden at efterlade spor. Lavet i holdbar sort ABS-plast. Leveres med detaljerede monterings instruktioner. Du kan montere både Brodit og Fix2Car mobilholdere på dette Brodit Proclips beslag. Se vores mobilholdere lige her. Modelnummer: 804236 Passer til følgende Ford modeller: Flex årgang 2009-2013 Monteringsplacering: Left Mount - til venstre for rattet på A-stolpen EAN: 7320288042367

DKK 199.00
1

Brodit Proclip Monteringsbeslag - Ford Flex 09-12 (USA model)

Brodit Proclip Monteringsbeslag - Ford Flex 09-12 (USA model)

Smart Proclip bilbeslag fra kendte Brodit. ProClip er et monterings beslag til din bils instrumentbræt. På en Brodit ProClip kan du installere f.eks en holder til din smartphone, GPS eller tablet. Bil beslaget er lavet specifikt til den enkelte bil model og årgang hvilket sikrer at den sidder sikkert og altid inden for rækkevidde. ProClip er let at installere. Installationen er hurtig, ingen specielle værktøjer eller afmontering af instrumentbrættet er påkrævet, og beslaget skader ikke instrumentbrættet og kan fjernes igen uden at efterlade spor. Lavet i holdbar sort ABS-plast. Leveres med detaljerede monterings instruktioner. Du kan montere både Brodit og Fix2Car mobilholdere på dette Brodit Proclips beslag. Se vores mobilholdere lige her. Modelnummer: 854235 Passer til følgende Ford modeller: Flex årgang 2009-2012 (USA model) Monteringsplacering: Center Mount - til højre for rattet EAN: 7320288542355

DKK 199.00
1

Brodit Proclip Monteringsbeslag - Ford Flex 13-19 (USA model)

Brodit Proclip Monteringsbeslag - Ford Flex 13-19 (USA model)

Smart Proclip bilbeslag fra kendte Brodit. ProClip er et monterings beslag til din bils instrumentbræt. På en Brodit ProClip kan du installere f.eks en holder til din smartphone, GPS eller tablet. Bil beslaget er lavet specifikt til den enkelte bil model og årgang hvilket sikrer at den sidder sikkert og altid inden for rækkevidde. ProClip er let at installere. Installationen er hurtig, ingen specielle værktøjer eller afmontering af instrumentbrættet er påkrævet, og beslaget skader ikke instrumentbrættet og kan fjernes igen uden at efterlade spor. Lavet i holdbar sort ABS-plast. Leveres med detaljerede monterings instruktioner. Du kan montere både Brodit og Fix2Car mobilholdere på dette Brodit Proclips beslag. Se vores mobilholdere lige her. Modelnummer: 854844 Passer til følgende Ford modeller: Flex årgang 2013-2019 (USA model) Monteringsplacering: Center Mount - til højre for rattet EAN: 7320288548449

DKK 199.00
1

Brodit Proclip Monteringsbeslag - Ford Flex 13-19 (USA model)

Brodit Proclip Monteringsbeslag - Ford Flex 13-19 (USA model)

Smart Proclip bilbeslag fra kendte Brodit. ProClip er et monterings beslag til din bils instrumentbræt. På en Brodit ProClip kan du installere f.eks en holder til din smartphone, GPS eller tablet. Bil beslaget er lavet specifikt til den enkelte bil model og årgang hvilket sikrer at den sidder sikkert og altid inden for rækkevidde. ProClip er let at installere. Installationen er hurtig, ingen specielle værktøjer eller afmontering af instrumentbrættet er påkrævet, og beslaget skader ikke instrumentbrættet og kan fjernes igen uden at efterlade spor. Lavet i holdbar sort ABS-plast. Leveres med detaljerede monterings instruktioner. Du kan montere både Brodit og Fix2Car mobilholdere på dette Brodit Proclips beslag. Se vores mobilholdere lige her. Modelnummer: 854845 Passer til følgende Ford modeller: Flex årgang 2013-2019 (USA model) Monteringsplacering: Center Mount - til højre for rattet EAN: 7320288548456

DKK 199.00
1

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 11 og Datalogic Memor 10 - 719228

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 11 og Datalogic Memor 10 - 719228

#html-body [data-pb-style=N7WSYDD]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719228With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. Fits device with Datalogic original RUBBER BOOT (94ACC0193 ).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform. Fits for:Datalogic Memor 11Datalogic Memor 10

DKK 1339.00
1

Brodit Qi trådløs Aktiv opladningsholder til Point Mobile PM30 - 718263

Brodit Qi trådløs Aktiv opladningsholder til Point Mobile PM30 - 718263

#html-body [data-pb-style=B4QGNCG]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi Wireless Charging Phone Holder with car chargerArt.718263With USB-A cable + car charger with 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.With USB-A-cable with car charger for connecting to the vehicle's 12/24V socket. The car charger has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to the Green USB-A port on the power supply unit (Output: 1). The White USB-A charging port (Output: 2) is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Attach onto a ProClip mounting platform.Fits for:Point Mobile PM30

DKK 1179.00
1

Brodit Qi Trådløs Aktiv Holder med kugleled til Datalogic Memor 20 - 719232

Brodit Qi Trådløs Aktiv Holder med kugleled til Datalogic Memor 20 - 719232

#html-body [data-pb-style=JBKLXA9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719232With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 20

DKK 1339.00
1

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 20 - 718232

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 20 - 718232

#html-body [data-pb-style=HR2DDQO]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi Wireless Charging Phone Holder with car chargerArt.718232With USB-A cable + car charger with 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.With USB-A-cable with car charger for connecting to the vehicle's 12/24V socket. The car charger has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to the Green USB-A port on the power supply unit (Output: 1). The White USB-A charging port (Output: 2) is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 20

DKK 1249.00
1

Brodit Qi Trådløs Aktiv Holder med kugleled til Point Mobile PM30 - 719263

Brodit Qi Trådløs Aktiv Holder med kugleled til Point Mobile PM30 - 719263

#html-body [data-pb-style=GXWCUS0]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719263With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform. Fits for:Point Mobile PM30

DKK 1229.00
1

Brodit Qi trådløs opladningsholder med kugleled til Datalogic Memor 11 og Datalogic Memor 10 - 718228

Brodit Qi trådløs opladningsholder med kugleled til Datalogic Memor 11 og Datalogic Memor 10 - 718228

#html-body [data-pb-style=K3DR607]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi Wireless Charging Phone Holder with car chargerArt.718228With USB-A cable + car charger with 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. Fits device with Datalogic original RUBBER BOOT (94ACC0193 ).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.With USB-A-cable with car charger for connecting to the vehicle's 12/24V socket. The car charger has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to the Green USB-A port on the power supply unit (Output: 1). The White USB-A charging port (Output: 2) is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 11Datalogic Memor 10

DKK 1249.00
1

Brodit Qi tråldløs aktiv Holder med kugleled til Datalogic Memor 20 - 719233

Brodit Qi tråldløs aktiv Holder med kugleled til Datalogic Memor 20 - 719233

#html-body [data-pb-style=R1PY3CE]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719233With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. Fits device with Datalogic original RUBBER BOOT.Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 20

DKK 1339.00
1