2 resultater (7,36069 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Drainage Bottle Gully Back Inlet Square Grid - 110mm - Pack of 10

Drainage Bottle Gully Back Inlet Square Grid - 110mm - Pack of 10

110mm Underground Drainage Roddable Back Inlet Bottle Gully With Square Grid (Pack of 10)Bottle Gullies are usually used externally alongside the house wall when introducing waste or rainwater pipes into a foul drain. They can also be used on Surface Water drains to collect rainwater from paved areas. You should always check with your local authority before connecting rainwater pipes into a foul drain unless this is an existing situation.The top section of any gully should be at least 150mm below the Damp Proof Course Level.The square top of this gully swivels, enabling it to be fitted flush to wall or paving slab regardless of which direction the gully outlet pipe faces.A Back Inlet gully allows new inlets to be connected into an existing drain run. The outlet of this fitting is lower than the inlet to ensure that the air seal is maintained and that there is no backflow.Bottle Gullies provide a trap that stops foul odours from the underground drainage system from escaping into the air.This bottle gully is also roddable. There is a central chamber within the body of the gully that can be removed for cleaning and clearing purposes.A UC110D couplingis required to connect the outlet of the gully to 110mm Pipe. A single socket bend will also connect onto the outlet if required.Please watch our overview video below

GBP 178.90
1

Flexi Underground Ducting Perforated Gas - 160mm (O.D.) x 50mtr Yellow Coil

Flexi Underground Ducting Perforated Gas - 160mm (O.D.) x 50mtr Yellow Coil

Our yellow perforated underground ducting is used for ducting gas supply services, usually yellow MDPE pipes, when connecting from the boundary to the house in a single way corrugated pipe. It is available in coil diameters of 63mm, 80mm, 110mm and 160mm. These measurements refer to the outside diameters (O.D.), all dimensions can be found in the table alongside the product image.The perforations in the duct allow gas to vent safely in the event of a leak. The ribbed external wall ensures that the duct can withstand high compressive forces.You should always choose a diameter that allows plenty of room within the duct to allow the gas pipe to be drawn through smoothly.All full coils come with an integral coupler. The coupler enables two coils to be connected together as required.This coil is manufactured to BS4962 and it complies with Transco specifications.

GBP 347.47
1