16 resultater (5,51185 sekunder)

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Lian Li O11DEXL-1W Upright GPU-Bracket White

Lian Li O11DEXL-1X Upright GPU-Bracket - Black

Lian Li O11DE-9X Upright GPU bracket for O11D Evo Black - updated for improved 40 series support

Lian Li O11DE-9W Upright GPU bracket for O11D Evo White - updated for improved 40 series support

Lian Li LANCOOL 205M Mesh mATX -kotelo, snow

Lancool 205 Mesh C Midi Tower Black

Lian Li PW-PCI-4-60X, PCIE4.0 Riser card cable 60cm, Black

Lian Li PW-PCI-E20 Riser Card for O11 XL

Lian Li LANCOOL III - miditornikotelo, ikkunalla, Musta

Lian Li LANCOOL III - miditornikotelo, ikkunalla, Musta

Lancool iii, the premium mid-tower chassis, offers better thermal performance than lancool ii by including 4 pre-installed 140mm pwm fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.the lancool iii black features a premium hairline brushed aluminum element that looks as good as it feels. The tempered glass panel allows showing off the internal components.the hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the psu and storage drives.the lancool iii is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.the multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.multiple storage drive mounting locations are supported for up to 12 x 2.5” ssds or 4 x 3.5” hdds and 8 x 2.5” ssds.as the second chamber located on the right side is visible, great consideration has been given to cable management. The lancool iii features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.the removable psu mounting bracket allows for psu installation outside of the chassis, to then slide it in through from the rear.

EUR 159.90
1

Lian Li O11D Mini-S - Mini-tornikotelo, ikkunalla, Valkoinen

Lian Li O11D Mini-S - Mini-tornikotelo, ikkunalla, Valkoinen

Think big. Build small.o11d mini adding to the o11 dynamic series, the classic and mordern looking. A case that would accommodate the maximum number of water-cooling configurations without being oversized. With a modular back panel design, the user has the option to choose from 3 slots/ 5 slots/ 7 slots i/o shield to optimize the case to the configuration of user’s choice. Supports mini-itx, micro-atx, atx, and e-atx motherboard sizes. And up to 9 fans to cool the chassis.configuration of your choicemodular back paneldecide how many expansion slots you need. Calculate the size of your fans & accessories.pick your motherboard type. 3 kinds of back panels to meet your demand!side radiator configuration with long gputhe 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator and leaves enough space to install long gpus in this compact case.flat pump standideal for mounting the pump directy at the bottom of the case.elevated pump standmounting the pump next to the 240/280mm radiator.easily match interface.floating pump standmounting above a 120mm fan on a radiator.easily match interface.a series of o11 dynamicas a member of the o11 family,the o11d mini is designed to support a maximum number of radiators to optimize the water-cooling potential,and this even with a smaller frame.dual-chamber design for cable managementcarried from the design of the o11d series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points and velcro strap channels are provided to tidy up the cables while the ssd mounting bar helps keep the loose cables all snuggled up to ensure a clean look and prevent the right-side panel from not closing or bulging.complete dust protectionall 3 ventilation intake sides are equippedwith magnetic dust filters and a removable dust trayto prevent the dust from entering the case.optional accessoryo11d mini vertical gpu kitsthe vertical gpu enabled back panel can be adjusted up and down for clearance of the fans and radiator at the bottom of the case.

EUR 131.90
1

Lian Li pc-o11d-rog - miditornikotelo, Musta, Hopea

Lian Li pc-o11d-rog - miditornikotelo, Musta, Hopea

Bigger in every way a mighy powerful chassis. Modular design flexiblity for any configuration. Hot swappable drives.spacious for multiple and bigger components.seamlessly supporting e-atx motherboards.rgb lighting sync front panel addressable rgb.tempered glass on the front, and left side. E-atx ,atx full tower gaming computer casemodular designflexibility for any configurationhot swappable drivesfor replacement or addition of storage without shutting down the systemspacious for multiple and bigger components(d) 471 x (w) 285 x (h) 513mmeasier built processeffortless cable managementseamlessly supportinge-atx motherboardsextension bar (optional) enables support for the rog dominus extremergb lighting synch front panel addressable rgbbuilt-in rgb effect controlled by the front panel m|c buttons to synch with the motherboard, switch to the 8th modeexquisite aluminum exteriori/o ports panel front panel right side case feeteffortless assemblypush and hold to unlock the top panelscrew-free, quick and easyupgraded cooling supportstronger airflow support for an additional 120mm fan at the rearenough room for a thick radiator at the bottom even when mounting dual gpu or vertical gpumultiple type of ports to satisfy any need4 x usb3.0 + 1 x type c + m|c rgb control buttons2 x usb3.0 at top and bottom to catter to different usage scenariosmore flexibility for gpu configuration8 slots to support dual gpu or vertically mount gpusupporting high-end gpus up to 169mm talloptimized storage layoutinterchangeable, more options for customisation possibility63 inside the drive panel behind the motherboard3 on the mounting bracket beside the motherboardeach section is replacable with 120mm fanso11d distro-plate g1 designed by ekwbmultiple inlet and outlet portssimplifies the water-cooling build processargb lighting effectcome with a powerful ddc3.1 pwm water pumpgerman engineering approvedthe o11 dynamic series from lian li is developed in collaboration with der8aur, a world-renowned german overclocking, water cooling, and gaming evangelist. Always looking for ways to improve computer design and performance, der8auer volunteered his time to review and test the design concepts of the o11d series.starting with the first o11 dynamic and up until the most recent models of the o11d series, lian li appreciates the input from der8auer which helped make the o11d series exceptional cases, especially in terms of custom water cooling compatibility, ease of build, and features offered. As a result, der8auer’s seal of approval is elegantly displayed beside the lian li logo, standing as a statement of quality and reliability.

EUR 216.90
1

Lian Li HydroShift LCD 360S -nestejäähdytysjärjestelmä, musta

Lian Li HydroShift LCD 360S -nestejäähdytysjärjestelmä, musta

Unleash power, elevate styleexperience a pc aesthetic revolution withhydroshift aio’s side-mounted coolant pathway,integrating cooling tubes with the radiator for a sleek, flawless look.side-mounted designthe hydroshift aio features an innovative side-mounted design for its cooling tubes, which are snugly attached to the side of the radiator. Combined with several thoughtful design elements, this ensures a clean and streamlined appearance for the entire cooling setup once installed.pre-installed mounting bracketsfixed brackets on the radiator ensure the coolant tubes stay securely in place, with an additional bracket included for cases with limited top-mount space.server-grade ribbed tubesthese highly durable and flexible tubes allow tight bends without compromising internal diameter or flow rate.cable clipsused to organize the cooling tubes and cables extending from the pump, ensuring a smooth and cohesive overall appearance.pump coverused to conceal the pump bracket, maintaining a sleek and clean aesthetic throughout.dual direction l-shaped shroudscustomizable for either side of the radiator to maintain a consistent and stylish appearance.miniature yet mightyhydroshift aio delivers near-identical performance to the ga ii performance while boasting a significantly reduced size. The new design also eliminates the water isolation chamber, reducing the size of the water chamber.compared to the ga ii lcd that uses asetek’s 8th gen solution, the hydroshift aio is quieter and more efficient. Our tests indicate that when benchmarking the intel® core™ i9 processor 14900k at 280w, the cpu temperature for the hydroshift aio is reduced by 2.5°c compared to the ga ii lcd. At the same time, acoustic noise is lowered by 3dba.enhanced displayfeaturing a 480×480 resolution, 500 nits brightness, and 24-bit full color, customizable via l-connect 3.real-time monitoringthe real-time monitoring feature displays load, temperature, frequency, and other cpu/gpu info, with an adjustable layout. The number of sensors has increased from 2 to 4 compared to the ga ii lcd version.dynamic effectsonce the monitoring information layout is set, dynamic effects can be added for enhancement. The intensity and speed of these effects can be freely adjusted, or they can be set to change in response to the monitored hardware information.captured screenshots or recorded videoscapture and display images with the screenshot feature. The screen recording function lets you loop selected video parts, which can also serve as backgrounds for hardware monitoring info.new themethe hydroshift aio release brings l-connect 3 updates with multiple themes like atmosphere, planet city, and steampunk, also compatible with the ga ii lcd series. These themes offer unique visuals and preset layouts for hardware monitoring.optimized cable managementcompared to previous aio products, the hydroshift aio has optimized its cable management.the fan cables are integrated into the cooling tubes, simplifying the connection process.the usb cable is now also integrated into the pump.6-year warrantywith a 6-year warranty, including the fans and the controller, and compensation for hardware damage due to leakage (non-manmade causes) within three years, hydroshift aio prioritizes both performance and peace of mind.

EUR 191.90
1

Lian Li A4-H2O A4 - , Silver

Lian Li A4-H2O A4 - , Silver

A4-h2othe a4-h2o is an 11-liter small form factor case, a collaboration project with dan cases. Based on the original dan a4-sfx case sandwich layout concept, the a4-h2o continues the minimalist and compact form factor with improved hardware compatibility (including aio water cooling) and simplifies installation.a tribute to sffthe a4-h2o is an 11-liter small form factor case, a collaboration project with dan cases. Based on the original dan a4-sfx case sandwich layout concept, the a4-h2o continues the minimalist and compact form factor with improved hardware compatibility (including aio water cooling) and simplifies installation. 11-liter form factorat only 11 liters, the a4-h2o is one of the smallest cases on the market that supports triple-slot gpu and clearance for 240 aio water cooling.size comparisionthe a4-h20 is smaller in size than most consoles, and the minimalist design suits any living space or any entertainment center to enjoy games or movies.minimalist design – black or silvera minimalist design, the a4-h2o has premium aluminum exterior with ventilation from almost most sides. The a4-h2o is available in black or silver.for desktopsmall footprint of the a4-h20 fits on any desktop without taking up too much space for you to keep your space clean and spacious to game or work. Sandwich layout designthe sandwich layout allows for a triple-slot gpu to fit into the compact size case. Matched with a pcie gen. 3 or gen. 4 riser cable, the gpu is located behind the motherboard and leaves room for a 240mm radiator at the top of the case. Bottom, side, and top mesh panels ensure that the components get cooled directly with fresh air intake.easy aio installationa removable bracket at the top makes the installation of radiators up to 240mm in length much easier. The top compartment accommodates a fan radiator combo of up to 55mm in thickness.supports sfx, sfx-l power supplya removable mounting bracket is designed to support sfx and sfx-l power supplies. A power cord extension is also included and pre-routed to avoid interfering with other hardware.fully removable panelsfront, side, top and bottom panels can all be removed easily to provide easier access for installation and/or cable management.well ventilatedaside from the front panel, the top, sides and back of the a4-h2o are well ventilated with fine mesh which allows fresh air intake to enter the case.pcie-3.0 and pcie 4.0the a4-h2o includes a pcie gen.3 or pcie gen. 4 riser cable, to vertically mount the gpu and place it behind the motherboard. The pcie 4.0 riser cable supports transfer rate of 16gt/s (double the speed of pcie 3.0). Pcie gen.4 riser cables are backwards compatible with pcie gen 3.io and powerlocated on the left side of the case inside a recessed cutout, the front io includes a usb 3.1 type-c (internal key-a) port, a mic port, an hd-audio port, and a usb 3.0 type-a port (internal 19pin). At the top of the recess is a premium-grade power button.triple-slot gpu compatibleremoving the front panel provides a wide opening at the front to insert larger graphics card into the case with ease. The spacious interior supports a triple-slot graphics card of up to 322mm.optimized airflow for 2 slots gpusthe extra standoffs helps pushing a two slot gpu toward the side panel in order to exhaust or intake fresh air directly out of the chassis.removable bottom panel – cable management & storagethe removable bottom panel provides additional access to the inside of the case and makes for easier cable management. A 2.5” ssd drive can also be attached onto the bottom panel.a dan cases collaborationthe a4-h2o, is an update to the popular dan a4-sfx case with added water cooling support. This is a special collaboration with daniel hansen from dan cases. The a4-h2o is manufactured and sold by lian li.

EUR 198.90
1

Lian Li LANCOOL III - miditornikotelo, Valkoinen

Lian Li LANCOOL III - miditornikotelo, Valkoinen

Lancool iii, the premium mid-tower chassis, offers better thermal performance than lancool ii by including 4 pre-installed 140mm pwm fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.available in– two colors, two modelsthe lancool iii black features a premium hairline brushed aluminum element that looks as good as it feels, while the lancool iii white features a minimalist white powder coating. The tempered glass panel allows showing off the internal components.extreme airflow craftmanshipa fine mesh design has been implemented at the front, top, and both bottom side panels of the lancool iii.hinged panels all aroundthe hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the psu and storage drives.flexible configurationwith ample interior room, the lancool iii can offer different cooling and usage scenariosair coolingwith high airflow stock fans, and air tower clearance up to 185mm, the lancool iii is ideal for an air-cooling build.aio coolingwith ample front intake, the lancool iii can provide strong performance for an aio cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an aio with a 420 radiator/fan combo.custom water coolingwith the ability to support 3 × 360mm radiators simultaneously, the lancool iii can offer custom water-cooling enthusiasts, lots of imagination.spacious cooling supportthe lancool iii is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.multi-way front fan/radiator bracketthe multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.removable top fan bracketthe removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the lancool iii by providing enough clearance from the ram.modular psu shroud bracket – fan/ pump/ ssdthe adjustable modular psu shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” ssds, or a pump/reservoir combos.side multi-purpose mounting slotsmounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.extensive storage capacitymultiple storage drive mounting locations are supported for up to 12 x 2.5” ssds or 4 x 3.5” hdds and 8 x 2.5” ssds.comprehensive cable managementas the second chamber located on the right side is visible, great consideration has been given to cable management. The lancool iii features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.sliding cable routing coverby slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.reversible front i/ooptimized for pc locate on a desk, the front i/o can be relocated to the bottom of the chassis.friendly psu installationthe removable psu mounting bracket allows for psu installation outside of the chassis, to then slide it in through from the rear.anti-sag bracket for perfectly horizontal gpua gpu anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.optional vertical gpu kito11de-1x/1wthe o11d evo vertical gpu kit is compatible with lancool iii, offering adjustable clearance beneath the vertical gpu by installing it in different expansion slots.optional dust filter kitlan3-1x/1wa front, top and left side magnetic dust filter is offered to provide a higher level of dust filtration. Please note that the airflow will be impacted by the dust filters.

EUR 169.90
1

Lian Li LANCOOL III - miditornikotelo, ikkunalla, Valkoinen

Lian Li LANCOOL III - miditornikotelo, ikkunalla, Valkoinen

Lancool iii, the premium mid-tower chassis, offers better thermal performance than lancool ii by including 4 pre-installed 140mm pwm fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.available in– two colors, two modelsthe lancool iii black features a premium hairline brushed aluminum element that looks as good as it feels, while the lancool iii white features a minimalist white powder coating. The tempered glass panel allows showing off the internal components.extreme airflow craftmanshipa fine mesh design has been implemented at the front, top, and both bottom side panels of the lancool iii.hinged panels all aroundthe hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the psu and storage drives.flexible configurationwith ample interior room, the lancool iii can offer different cooling and usage scenariosair coolingwith high airflow stock fans, and air tower clearance up to 185mm, the lancool iii is ideal for an air-cooling build.aio coolingwith ample front intake, the lancool iii can provide strong performance for an aio cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an aio with a 420 radiator/fan combo.custom water coolingwith the ability to support 3 × 360mm radiators simultaneously, the lancool iii can offer custom water-cooling enthusiasts, lots of imagination.spacious cooling supportthe lancool iii is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.multi-way front fan/radiator bracketthe multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.removable top fan bracketthe removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the lancool iii by providing enough clearance from the ram.modular psu shroud bracket – fan/ pump/ ssdthe adjustable modular psu shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” ssds, or a pump/reservoir combos.side multi-purpose mounting slotsmounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.extensive storage capacitymultiple storage drive mounting locations are supported for up to 12 x 2.5” ssds or 4 x 3.5” hdds and 8 x 2.5” ssds.comprehensive cable managementas the second chamber located on the right side is visible, great consideration has been given to cable management. The lancool iii features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.sliding cable routing coverby slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.reversible front i/ooptimized for pc locate on a desk, the front i/o can be relocated to the bottom of the chassis.friendly psu installationthe removable psu mounting bracket allows for psu installation outside of the chassis, to then slide it in through from the rear.anti-sag bracket for perfectly horizontal gpua gpu anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.optional vertical gpu kito11de-1x/1wthe o11d evo vertical gpu kit is compatible with lancool iii, offering adjustable clearance beneath the vertical gpu by installing it in different expansion slots.optional dust filter kitlan3-1x/1wa front, top and left side magnetic dust filter is offered to provide a higher level of dust filtration. Please note that the airflow will be impacted by the dust filters.

EUR 178.90
1