31 resultater (0,20102 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Vis alle

Nulstil filter

Produkter
Fra
Butikker

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 1.8mtr

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 1.8mtr

Traditional Express push fit cast iron soil pipes are available in 1.8m and 3m lengths. The pipes themselves are given an internal two-pack epoxy resin coating for added protection. All of our push fit cast iron soil pipes are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561. This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 113.02
1

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 3mtr

Push Fit Cast Iron Soil Double Spigot Pipe - 100mm x 3mtr

Traditional Express push fit cast iron soil pipes are available in 1.8m and 3m lengths. The pipes themselves are given an internal two-pack epoxy resin coating for added protection. All of our push fit cast iron soil pipes are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561. This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 188.33
1

Push Fit Cast Iron Soil Adjustable Steel Bracket - 100mm

Push Fit Cast Iron Soil Adjustable Steel Bracket - 100mm

This adjustable soil pipe bracket is used to secure a cast iron soil pipe back the wall. The pipe is held firm by hex bolts and nuts on each side.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 17.71
1

Push Fit Cast Iron Soil Bend - 45 Degree x 100mm

Push Fit Cast Iron Soil Bend - 45 Degree x 100mm

This 45 degree bend is used to create a change of direction in the soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 59.15
1

Push Fit Cast Iron Soil Socket Plug - 100mm

Push Fit Cast Iron Soil Socket Plug - 100mm

This socket plug is used to blank off a connection to a soil pipe that is no longer required.As cast iron push fit pipes and fittings are all plain ended a coupler is required to connect this plug to a soil pipe or fitting.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 18.06
1

Push Fit Cast Iron Soil Bend - 22.5 Degree x 100mm

Push Fit Cast Iron Soil Bend - 22.5 Degree x 100mm

This 22.5 degree bend is often referred to as an easy bend. It is used to create a slight change of direction in the soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 95.72
1

Push Fit Cast Iron Soil Boss Pipe - 100mm

Push Fit Cast Iron Soil Boss Pipe - 100mm

This boss pipe is used to introduce a single waste pipe into the soil stack. The boss is already open and tapped with a 2andquot; BSP thread. As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this boss pipe to a soil pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.andgt;This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 106.06
1

Push Fit Cast Iron Soil Offset Bend - 75mm Projection x 100mm

Push Fit Cast Iron Soil Offset Bend - 75mm Projection x 100mm

This fixed projection offset bend is usually used to create a vertical offset, or swan neck as it is sometimes called, within the soil stack. This offset bend is available in 75mm and 130mm projection options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 62.57
1

Push Fit Cast Iron Soil Offset Bend - 130mm Projection x 100mm

Push Fit Cast Iron Soil Offset Bend - 130mm Projection x 100mm

This fixed projection offset bend is usually used to create a vertical offset, or swan neck as it is sometimes called, within the soil stack. This offset bend is available in 75mm and 130mm projection options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 83.39
1

Push Fit Cast Iron Soil Bend - 67.5 Degree x 100mm

Push Fit Cast Iron Soil Bend - 67.5 Degree x 100mm

This 67.5 degree bend is used to create a change of direction in the soil stack. Two bends together can be used to make an offset, or swan neck as it is sometimes called, in the soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 59.15
1

Push Fit Cast Iron Soil Long Tail Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Long Tail Bend - 92.5 Degree x 100mm

This 92.5 degree long tail bend is sometimes referred to as a swivel bend or a pistol bend. It is used to create a sharp change of direction in the soil stack, often in conjunction with another fitting.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 75.70
1

Push Fit Cast Iron Plain Soil Push Fit Socket - 100mm

Push Fit Cast Iron Plain Soil Push Fit Socket - 100mm

This push fit cast iron plain socket is used to join two pipes together, or to connect a pipe to a fitting.Each vertically installed pipe in any soil stack should always include an eared socket to give support and stability to the system. Plain sockets are usually installed on branch arms to preserve the authentic appearance of the system. All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561. This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 44.66
1

Push Fit Cast Iron Soil Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Bend - 92.5 Degree x 100mm

This 92.5 degree short radius bend is used to create a 90 degree change of direction in the soil stack. The 92.5 degree angle of the bend is used to create a fall of 2.5 degrees within the system, promoting a self-cleansing flow.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 59.15
1

Push Fit Cast Iron Soil Double Branch - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Double Branch - 92.5 Degree x 100mm

Double branches in a soil stack have a number of uses, but essentially they are used for the purpose of connecting multiple pipe runs, usually in a vertical plane. They are most commonly seen on external elevations, connecting a number of above ground drainage runs together into a single soil stack.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 113.93
1

Push Fit Cast Iron Soil Double Boss Pipe Opposite - 100mm

Push Fit Cast Iron Soil Double Boss Pipe Opposite - 100mm

This boss pipe is used to introduce either one or two waste pipes into the soil stack. There are two options to choose from in our double boss pipes andndash; opposite bosses or bossed at 90 degrees to each other. Both of the bosses are already open and tapped with a 2andrdquo; BSP thread. As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this boss pipe to a soil pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 137.08
1

Push Fit Cast Iron Soil Branch with Rear Boss - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Branch with Rear Boss - 92.5 Degree x 100mm

This 92.5 degree branch incorporates a waste boss at the rear that allows a waste pipe to be connected into the soil system. The boss is already open and tapped with a 2” BSP thread. The 92.5 degree angle of the branch gives a 2.5 degree fall which promotes a self-cleansing flow within the soil pipe.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 124.70
1

Push Fit Cast Iron Soil Double Boss Pipe at 90 Degree - 90 Degree x 100mm

Push Fit Cast Iron Soil Double Boss Pipe at 90 Degree - 90 Degree x 100mm

This boss pipe is used to introduce either one or two waste pipes into the soil stack. There are two options to choose from in our double boss pipes andndash; opposite bosses or bossed at 90 degrees to each other. Both of the bosses are already open and tapped with a 2andrdquo; BSP thread. As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this boss pipe to a soil pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 137.08
1

Push Fit Cast Iron Eared Soil Push Fit Socket - 100mm

Push Fit Cast Iron Eared Soil Push Fit Socket - 100mm

This push fit cast iron eared socket is used to join two pipes together whilst adding support to an installation. It can also be used to connect a pipe to a fitting where additional support is required. Each vertically installed pipe in any soil stack should always include an eared socket to give support and stability to the system. Plain sockets are usually installed on branch arms to preserve the authentic appearance of the system. All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561. This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 48.00
1

Push Fit Cast Iron Soil Long Radius Bend - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Long Radius Bend - 92.5 Degree x 100mm

This 92.5 degree long radius bend is used to create a 90 degree change of direction in the soil stack. It is most commonly used at the foot of a soil stack. The 92.5 degree angle of the bend is used to create a fall of 2.5 degrees within the drainage system, promoting a self-cleansing flow.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this bend to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 95.72
1

Push Fit Cast Iron Soil Rectangular Access Pipe - 100mm

Push Fit Cast Iron Soil Rectangular Access Pipe - 100mm

The purpose of this access pipe is to allow the soil pipe system to be inspected and cleared in the event of any blockage. This pipe has a rectangular access door. To use the access point, simply remove the access door by undoing the bolts. This could potentially release any blockage above the door so it is always advisable to stand aside at this point!As cast iron push fit pipes and fittings are all plain ended a coupler is required to connect this access pipe to a soil pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 166.39
1

Push Fit Cast Iron Soil Branch - 135 Degree x 100mm

Push Fit Cast Iron Soil Branch - 135 Degree x 100mm

A soil branch is are one of the integral parts of any soil pipe system. It is used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main vertical soil stack.The 92.5 degree branch is the most popular option - the angle creates a 2.5 degree fall that promotes self-cleansing. Soil branches are also available in 112.5 and 135 degree options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 90.74
1

Push Fit Cast Iron Soil Branch - 112.5 Degree x 100mm

Push Fit Cast Iron Soil Branch - 112.5 Degree x 100mm

A soil branch is are one of the integral parts of any soil pipe system. It is used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main vertical soil stack.The 92.5 degree branch is the most popular option - the angle creates a 2.5 degree fall that promotes self-cleansing. Soil branches are also available in 112.5 and 135 degree options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 90.74
1

Push Fit Cast Iron Soil Branch - 92.5 Degree x 100mm

Push Fit Cast Iron Soil Branch - 92.5 Degree x 100mm

A soil branch is are one of the integral parts of any soil pipe system. It is used to bring horizontal and vertical pipe runs together, usually when connecting a pipe from a WC into the main vertical soil stack.The 92.5 degree branch is the most popular option - the angle creates a 2.5 degree fall that promotes self-cleansing. Soil branches are also available in 112.5 and 135 degree options.As our push fit cast iron soil pipes and fittings are all plain ended, sockets are required to connect this branch to a pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 90.74
1

Push Fit Cast Iron Soil Access Pipe - 100mm

Push Fit Cast Iron Soil Access Pipe - 100mm

The purpose of this access pipe is to allow the soil pipe system to be inspected and cleared in the event of any blockage. This pipe has an oval shaped access door. To use the access point, simply remove the access door by undoing the bolts. This could potentially release any blockage above the door so it is always advisable to stand aside at this point!As cast iron push fit pipes and fittings are all plain ended a coupler is required to connect this access pipe to a soil pipe.All of our push fit cast iron soil fittings are treated to a factory black two-pack gloss paint finish. The whole range is manufactured in grey cast iron to BS EN 1561.This soil pipe range is particularly well-suited to installations in public buildings, listed buildings and conservation projects. It is 100% recyclable. Click here to view or download full installation instructions.

GBP 107.72
1