mcb.dk | Få success online

Dynaudio Emit 25C - Centerhøjtaler - Hvid - Fri fragt

Dynaudio Emit 25C - Hjertet i dit surroundsystem Det siges, at soundtracket er op til 80 procent af filmoplevelsen, og derfor er centerhøjttaleren helt central for din opleves. Der kan argumenteres for, at Emit 25C er den vigtigste del i din hjemmebiograf. Det er nemlig her, at dialogen fra en film kommer fra, og det er her, at musikkens omdrejningspunkt ofte kommer fra i et multi-kanal mix. Det er afgørende at få dette punkt rigtigt, og det gør Emit 25C. Emit 25C er grundlæggende en Emit 30, der er vendt på siden, med mellemtone/basenhederne placeret på begge sider af diskanten. Enhederne er de samme og delefilteret er det samme - dog med en anden boks og port-tuning. Men det er ikke at gøre dit system en bjørnetjeneste; stik modsat. Det betyder, at du får total sammenhæng mellem centerhøjttaleren og de to, der flankerer den (uanset om det er Emit 10, 20, 30 eller endda 50), sammen med de andre, du måtte placerer omkring din lytteposition. Emit 25C key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-quality mid/bass drivers Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound. The voice-coils themselves are made from lightweight aluminium wire, clad in a thin layer of copper. We’ve use aluminium here on the two-layer glass-fibre former because its weight doesn’t impede the driver’s movement. The copper layer means it can take more advantage of the magnetic energy generated by the dual-stacked ferrite magnet system. It magnifies that flux energy for more power – without sacrificing fleet-footed dynamics. Top-end performance Emit 25C has a high-performance Cerotar tweeter, along with all other Emit speakers – and the award-winning Evoke family. It’s based on the renowned Esotar Forty tweeter found in our Special Forty anniversary speaker, and features innovative technology that reduces unwanted resonance and optimises airflow. As with Evoke, Confidence and Contour i (among others), it also has a secret innovation: the Hexis. This is a small dimpled inner dome that reduces reflections to the back of the playing surface. You’ll hear its effect in the form of incredible detail resolution: sweet, smooth treble that doesn’t fatigue your ears – even during a long listening session. Danish cabinet design Emit 25C is available in three custom laminate finishes: Black, White and Walnut. They’re designed to complement each other, and blend seamlessly into your living room. That’s especially important for a centre channel, where (as much as we hate to say it), you should be spending more time looking at the picture above it than the speaker itself. Emit 25C is the lynchpin of your home cinema speaker system. Power, control and finesse, rolled into one compact unit.

Dynaudio Emit 30 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 30 - Perfekt til større stereoanlæg eller hjemmebiografen Hvis du leder efter lidt mere power fra dit system, så har du fundet det. Emit 30 er en kompakt 2,5-vejs højttaler, der er designet til at imponere uanset om den bruges som et selvstændigt stereopar eller som en del af en 5.1-kanals (eller flere) hjemmebiograf. Ligesom sin lillebror, Emit 10, bruger den de 14 cm MSP basenheder, der findes i Evoke-serien. Til forskel fra Emit 10 er basenhederne fordoblet i hver højttaler, så du får en bedre basgengivelse, en klarere mellemtone og mere punch. MSP står for Magnesium Silicate Polymer, der er et materiale, som Dynaudio har udviklet til deres basenheder og brugt i årtier - selv på deres mest roste high-end modeller. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning (en de har tunet og finpudset gennem årene) for at levere kontrol og direkte kraft. Lige der hvor det er nødvendigt. “Not only is it a good speaker, the Dynaudio Emit 30 throws down a gauntlet to other brands; if Dynaudio can do something like the Emit 30, why the **** can’t you? - Alan Sircom, Hi-Fi+ Emit 30 key features Designed and engineered in DenmarkThe entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeterEmit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simpleEach speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Premium woofer technology The cones are moulded in one piece; we don’t use a separate glued dust-cap. The little balance ribs around the edge of the centre are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives our engineers fine control over how the speaker moves – which, in turn, means fine control over how it performs. You’ll hear it as strong, tight bass and startlingly clear vocals, guitars and more. Even at eyebrow-raising volume. Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means we can more effectively direct where the magnetic energy goes – it’s a lesson we learned developing the award-winning Special Forty anniversary series, and it’s thrilling to be able to use it in our entry-level family. The target for all that flux is the voice-coil. We use aluminium windings in Emit 30. Aluminium is light (which minimises inertia on the cone’s back-and-forth movement), and because it’s lighter than copper wire, it means we can pack more windings on to the two-layer glass-fibre former. More windings equals more power, and greater control over fine movement. There’s a twist, though (please pardon the pun): we’ve coated the aluminium wire in a very thin copper coating to further increase the control the amplifier has on the voice-coil. More force with only a fractional weight gain: win-win. High-performance Cerotar tweeter While the twin 14cm mid/bass units deal with the midrange and bass, the upper frequencies are handled by the tweeter. Emit might be an ‘entry-level’ speaker, but we certainly haven’t used any old unit off the shelf; witness the incredible Cerotar tweeter (the same as we use in Evoke). It’s based on the Esotar Forty anniversary tweeter and the Esotar Pro found in our Core studio reference speakers, and must be heard to be believed. The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminium voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue – perfect if you’re given to long listening sessions (and you’re music lovers, so we bet you are). The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimise unwanted ‘chuffing’. It’s supplied with foam inserts that can be used to optimise performance for the speaker’s position relative to the wall. Danish-designed cabinetry Emit 30’s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. They’re internally damped with polyester fibre, measured down to the gram for exactly the right amount of resonance suppression. On the outside, you can choose from three custom laminate finishes: Black, White or Walnut. They’ve been chosen to complement any room,

Dynaudio Emit 50 - Gulvhøjtaler - Hvid - Fri fragt

Dynaudio Emit 50 - Gulvhøjtaleren til det hele Uanset om du vil bygge et kraftfuldt stereoanlæg eller løfte dine filmoplevelser til nye højder, så har Emit 50 dig dækket. Her er der tale om et par store gulvhøjtalere, som gør et ordentligt statement helt uden at sprænge bankkontoen. Dens avanceret teknologi og tuning leverer vellyd til dit rum i et prisleje, der er åbent for selv dem, der tager deres første skridt ind i high-fidelity lyd. Emit 50 leverer et niveau af kraft og finesse, som du ærligt talt kan betale den dobbelte pris for andre steder. Men hvorfor skulle du det? Dens dobbelte 18 cm basenheder, 15 cm mellemtone og 28 mm soft-dome Cerotar diskant er hver især dedikeret til at producere den klarest mulige ydeevne - ved en lydstyrke helt oppe på biografniveau. Emit 50 key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. High-performance woofers Let’s give you the bottom line: Emit 50’s woofers dig deep. The two 18cm units (the same type used in Emit 20) use trickle-down technology from our high-end Evoke, Contour i and Confidence families to deliver astonishing low-frequency performance, well above the previous Emit range. It means the speaker can dig truly deep into the bass (-3dB at 33Hz, which equals Contour 60i and Confidence 60, if you’re into numbers), but allows us to keep the cabinet at a size that still fits your living room. The one-piece cones are made from our own in-house-formulated MSP (Magnesium Silicate Polymer) material, complete with integrated dust-cap. Making drivers from one piece of material, rather than sticking on a separate piece, gives the playing surface a much better connection to the voice-coil behind it. And that means better control over their movement: less unwanted distortion and resonance, and more fine detail – even in the lowest notes. Unlike the other speakers in the series, Emit 50’s woofers use copper voice-coils. That’s because they don’t need to be quite as sprightly as they would when also handling midrange duties (as on Emit 20). So, we’ve used heavier copper for more outright punch. That’s intensified by the dual-stacked magnet system, which is optimised to direct its energy directly into the voice-coil. Dedicated midrange driver The midrange driver is a different beast. Exclusive to Emit 50, it’s derived from the version we used in the Evoke range – which, in turn, came directly from the high-end Contour series. It has a powerful ferrite ceramic magnet, a short version of the 38mm-diameter aluminium voice-coil (specifically optimised for midrange performance), and a lightweight surround. It’s designed for speed and precision: exactly what you need for reproducing nuanced vocals, orchestral strings and wind instruments, and more. Sweet high frequencies Emit 50’s Cerotar tweeter is the same as you’ll find in the Evoke family. It’s a ground-up design that uses key technologies developed for our award-winning Special Forty anniversary speaker, plus Confidence and even our Core range of professional studio reference monitors. Our engineers are really proud of it, and rightly so. Cerotar’s 28mm coated fabric soft-dome diaphragm sits on top of another Dynaudio innovation: the Hexis. This ingenious dimpled inner dome is placed close enough behind the fabric to stop unwanted resonance reflecting back to the rear of the playing surface. It keeps the frequency response smooth for cleaner, sweeter treble – and more detail in your music. The tweeter is powered by a powerful Ferrite+ strontium carbonate ceramic magnet to give it more sensitivity. That translates to your ears as more authentic performance – you hear what you’re meant to hear; nothing more, nothing less. And because it’s so natural, it also reduces fatigue – so you can listen for longer. Clever hybrid crossover design There’s a traditional Dynaudio first-order circuit for the tweeter, a second-order design for the midrange driver, and a fourth-order topology for the woofers. Sure, we could’ve just created a single design to cover them all – but that would mean compromising performance, which is something our engineers simply won’t do. Authentic Danish design The cabinets have been designed and tuned in-house in Denmark. They’re constructed from 18mm MDF, and damped with specially selected polyester

Dynaudio Emit 20 - Kompakthøjtaler - Hvid - Fri fragt

Dynaudio Emit 20 - Hi-Fi starter ved Emit-serien Emit 20 er en højtydende kompakthøjttaler, der udnytter teknologi fra Evoke-, Contour i- og Confidence-serien. Det giver en fantastisk kombination af detaljer og dynamik til små til mellemstore rum. Med Emit 20 får du en førsteklasses audiofil højttaler, der overrasker til prisen. Det er måske en "entry-level" model, men Emit 20 er stadig proppet med teknologi, som du finder i Dynaudio's andre serier - helt op til flagskibet Confidence og deres Core professionelle referencemonitorer. Tag ikke fejl - med Emit 20 vil du opleve en præstation, du simpelthen ikke ville forvente på dette niveau. Emit-serien blæser de fleste konkurrenter omkuld, når det kommer til pris og ydelse. Emit 20 key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It's a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you're listening in stereo or have a full multi-channel system. Mid/bass power and control Emit 20 uses an 18cm MSP (Magnesium Silicate Polymer) woofer, based on the one we’ve used in the Evoke series. MSP is a material we developed in-house, and have used for many years on our most renowned models. The cone itself is a one-piece design; the dust-cap is moulded as part of the playing surface, which gives it a solid connection to the voice-coil that moves it back and forth. You’ll hear that connection as supreme control and detail in the low and midrange frequencies. The voice-coil itself is aluminium, wound onto a two-layer glass-fibre former. We’ve a long history of using aluminium wire in our voice-coils – and for good reason. It’s light, so doesn’t impede fine movement, and we can get more windings on the former for a given length of wire. That means more ‘BL’, or magnetic power. More power means more punch. We’ve boosted that further, too, by coating the aluminium wire in copper. Combined with the stacked ferrite magnet system and new surround, that gives Emit 20’s long-throw mid/bass driver all the bass power you could want, even at high volumes, combined with amazing control over midrange frequencies (where instruments such as guitars, vocals and violins reside). High-level tweeter performance Emit 20 uses the Cerotar tweeter directly from Evoke. It’s a 28mm soft-dome design that includes the ingenious Hexis inner-dome device. The coated fabric dome delivers sweet-sounding high frequencies – all the openness and detail the artists want you to experience in their recordings – while the Hexis smooths the frequency response and reduces unwanted resonance for surprising clarity. Cerotar is powered by a powerful Ferrite+ strontium carbonate ceramic magnet system. It gives the tweeter all the power it needs to play loud without breakup while maintaining all the nuance you could want. Even at neighbour-bothering levels. And because it uses technology from our top-of-the-range Core pro reference speakers (whose users need to listen intently for long periods), you won’t get tired when you’re in the middle of a long session. Inside the crossover The mid/bass driver and tweeter are marshalled by a custom-designed crossover from the same team who brought you Heritage Special and Core. Our engineers used a hybrid first- and second-order topology for the tweeter and woofer respectively, giving them exceptional control over each driver’s behaviour. It means you’ll hear what the artist wants you to hear, without compromise. An impressive finish Emit 20 comes in three custom-designed laminate finishes – Black, White and Walnut – that beautifully complement the cabinets’ clean Scandinavian design (conceived in-house at our headquarters in Denmark). Black magnetic grilles come as standard in the box. We’ve even lavished attention on the cover-rings, which hide the mounting screws. They’re one-piece moulded with the surface finish embedded in the material, which eliminates the need for lacquer – so they won’t degrade over time. If you want an audiophile-level standmount speaker for a stereo set-up in medium-size room, or fancy a little more ‘oompf’ from your rear surround channels, Emit 20 is the ideal choice.

Dynaudio Emit 10 - Kompakthøjtaler - Hvid - Fri fragt

Dynaudio Emit 10 - Kompakthøjtaler med reference teknologi Emit 10 er en 2-vejs kompakthøjtaler, der bruger teknologi, der er direkte afledt af Dynaudio's ultra-high-end Confidence, Contour i og Evoke serier. Det er den ideelle model til mindre rum og satellitkanaler i et hjemmebiografsystem. Emit 10 er designet og konstrueret hos Dynaudio Labs i Danmark, hvor de er blevet udviklet og tunet af de samme hoveder, der er bag Dynaudio's prisvindende high-end serier. Helt ned til mindste detalje. I højtaleren finder du en 14 cm MSP (Magnesium Silicate Polymer) mellemtone/basenhed. MSP er et materiale, Dynaudio selv har udviklet og har brugt i årtier. MSP giver præcis den rigtige kombination af lethed, stivhed og dæmpning. Resultatet er, at du får en superfin kontrol helt uden tab af kraft, og det er afgørende, når en enhed skal gengive både lav- og mellemtonefrekvenser. Emit 10 key features Designed and engineered in Denmark The entire Emit family has been put through its paces in our world-class Jupiter measuring facility at Dynaudio Labs. We treat it exactly the same as we do every other speaker in our range: no stone left unturned. Cerotar tweeter Emit uses the highly regarded Cerotar tweeter from our Evoke series. It’s a high-quality high-frequency driver inspired by our top-end Confidence and Heritage Special speakers, and includes the innovative resonance-defeating Hexis inner dome. Clean and simple Each speaker in the Emit range is designed to fit with modern lifestyles and interiors. Clean lines, simple finishes and minimalist Scandinavian looks – whether you’re listening in stereo or have a full multi-channel system. Legendary engineering Emit 10’s mid/bass driver is derived from the Esotec+ in the successful Evoke series. Its double magnet system gives better movement control and sensitivity, which means you’ll hear improved frequency response and dynamics at lower frequencies, while retaining crystal-clear midrange performance. That means you’ll hear what you want from a powerful rhythm section, plus guitars, vocals and more – all without distortion at louder volumes. You’ll notice that the dust-cap isn’t simply glued on. It’s part of the playing surface of the cone. The little dashed line around its edge – the balance rib structure – is bonded directly to the 38mm voice-coil behind it. It’s an incredibly strong connection with the motor, which means more of the coil’s motion energy is transferred to the diaphragm. Behind the cone The voice-coil itself is made of copper-clad aluminium wire. Aluminium is light, which gives the driver a fleetness of foot you might not find elsewhere, while the copper coating increases conductivity for more power. It’s a winning combination for detail and punch. A high-quality double ferrite magnet system provides the power. It’s a stacked design to keep it compact, but it serves another purpose: using two magnets means our engineers were able to control the magnetic flux, directing it back to the voice-coil, where it’s needed the most. (We can’t break the laws of physics, but we do rather like to bend them a bit.) High-quality Cerotar tweeter The Cerotar tweeter is exactly what you’ll find in Evoke. It’s based on the one we’ve used in our award-winning Esotar Forty anniversary tweeter and the incredible Esotar3, which you’ll hear in Heritage Special and Confidence. It’s a 28mm fabric soft-dome unit with our special DSR (Dynaudio Secret Recipe) coating. Why fabric soft-dome tweeters? They convey all the detail and openness you could wish to hear from your recordings without subjecting you to unwanted fatigue over longer listening sessions. These are speakers you can (and, we hope, will) listen to late into the night. Behind the dome sits our much-talked-about Hexis device. It’s an ingenious dimpled inner dome that sits directly behind the playing surface and shapes airflow to optimise the frequency response and eliminate unwanted resonances. That means the diaphragm can move more precisely, so you’ll hear even more detail. It’s driven by a strontium carbonate Ferrite+ ceramic magnet system for more sensitivity, improved clarity and a natural, dynamic response.

Dynaudio Evoke 20 - Kompakthøjtaler - Hvid - Fri fragt

Dynaudio Evoke 20 - Store kompakthøjtalere til ethvert rum Evoke 20 er en kompakthøjtaler i fuld størrelse, som er designet til næsten enhver plads. Dens kraftfulde 18 cm mellemtone/bas sikrer, at den kan gå dybt, når der er brug for det, mens dens 28 mm soft-dome-diskant sørger for de fine detaljer. Og selvfølgelig ser dets danske design fantastisk ud, uanset hvor du sætter det. Det er et ideelt match. Evoke 20 er designet af folk, der elsker musik. De har lavet det fra hundredvis af timers intensiv måling og lytning - rigtig lytning, til rigtig musik, i rigtige rum. Så når du spiller din samling, ved du, at du hører, hvad de har hørt. Noget helt særligt. Hvad gør Evoke-serien så speciel? Man er ikke i tvivl om, at Evoke er noget helt specielt. Både når man ser den eller lytter til den for første gang. Det skyldes ikke mindst, at serien er blevet udviklet og designet af det samme hold, som står bag Dynaudio`s mest prestigefyldte og mest avancerede produkter. Her taler vi de helt nye Contour- og Confidence-serier samt deres professionelle studio monitors. Det er højtalerserier, der giver deres konkurrenter mere end kamp til stregen, og det er også tilfældet med Evoke. Lyden er exceptionel, og den er balanceret i dens gengivelse af musikken, så du kan lytte til en hvilken som helst genre med et smil på læben. Hver enkelt højttaler i Evoke-serien er blevet designet fra bunden. Det gælder både enhederne og teknologi, som er direkte baseret på deres reference modeller og professionelle serier. Deres studio monitors brugers i det mest velrespekterede pladestudier, og derfor vil du opleve, at megen musik bare lyder "rigtigt" på Dynaudio. Det skyldes, at højtalerne er tro mod, hvad kunstnerne har hørt, da de masterede den. Al den følsomhed, storhed og poesi som kunstnerne har lagt i indspilningen, vil Evoke formidle helt uberørt til dig. Udviklet i de mest avanceret målefaciliteter Dynaudio er gået hele vejen ved skabelsen af Evoke-serien. Derfor er Evoke blevet analyseret i deres Jupiter-målefacilitet, der er et af verdens - hvis ikke det mest - avanceret målerum. Jupiter rummet er et 13 x 13 x 13 m rum med en 7 m lang robotarm med påmonterede målemikrofoner i den bedste kvalitet. Forestil dig rummet fra X-Men filmene med Cerebro maskinen, og du har en idé om, hvordan det ser ud. Dynaudio har lagt, hvad nogen måske ville betragte som uforholdsmæssigt mange, kræfter i at lave Evoke-serien så avanceret, som den er. Især når man tager prisen i betragtning. Men de har ramt den perfekte balance mellem ydeevne og pris. Det er ikke alle, som har råd til Confidence eller Contour, og derfor sørger Evoke-serien for, at lytterne stadig kan opleve en stor del af, hvad disse superhøjtalere har at byde på. Både med hensyn til lyden, den indbyggende teknologi og den håndværksmæssige kvalitet. Evoke 20 key features Brand-new Cerotar tweeter A 28mm precision-coated soft-dome design derived directly from the award-winning Special Forty and the mighty new Confidence series. The new motor system uses strontium carbonate Ferrite+ ceramic magnets for improved sensitivity. The Hexis An ingenious inner tweeter dome that further smooths out the tweeter’s frequency response and minimises resonances – so all you get are the desirable ones. You’ll also find Hexis in the all-new Confidence. New Esotec+ woofers New long-throw designs for improved frequency response and low-frequency dynamics. They’re all made from MSP – a material we developed in-house and have used in our high-quality drivers for decades. Timeless Danish design Simple, clean, traditional, modern and luxurious. All at once. We’ve made sure Evoke is realistic for, and sympathetic with, real homes and real lives. It’s available in four finishes: Black High Gloss, White High Gloss, Walnut Wood and Blonde Wood. Advanced driver technology The 0.4mm thick, 18cm Esotec+ woofer is made from MSP (Magnesium Silicate Polymer), a proprietary material that we’ve been using in our speaker cones for decades. It provides the perfect balance of lightness, stiffness and damping that, combined with its strontium carbonate Ferrite+ ceramic magnet system, reproduces midrange and bass frequencies in perfect balance. The whole diaphragm is made from one piece of MSP. Rather than gluing on a dust cap or just leaving a hole, this construction makes the cone far more rigid – and means far less physical distortion. It gives a much better physical connection to the voice-coil, which means more of the coil’s motion energy is transferred to the diaphragm via the Balance Ribs around the centre. Evoke 20’s 52mm voice-coil is made from aluminium. We chose that over copper for this speaker because it gives the correct balance of weight and winding height to give bass frequencies power and enough mechanical and electrical damping, while also letting midrange frequencies (where a vast amount of musical detail lies) sing through clearly. A Nomex spider keeps everything centred and moving the way it should

DKK 16495.00

DIGITAL MARKETING

Mærke

Farve

Butik