653 resultater (0,26147 sekunder)

Vis alle filtre

Mærke

Butik

Pris (EUR)

Nulstil filter

Produkter
Fra
Butikker

Brodit Aktiv Holder med cigaradaptor til Zodiac Freetalk Pro/Flex - 982491

Brodit Aktiv Holder med cigaradaptor til Zodiac Freetalk Pro/Flex - 982491

#html-body [data-pb-style=HSQMWCU]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugThe Vehicle Charging Cradle is custom made for a perfect fit. The cradle holds a two-way radio in an upright position for better reception. Each has a cigarette lighter charging cord permanently attached to the cradle with built in contact points for the battery. Utilizing a Delta-V charging technique, the cradle provides rapid and trickle charging. Each cradle has a number of features such as a security timer, overheat sensor, and LED indicator to show that charging is in progress. The indicator changes from red to green when fully charged. Attach onto a ProClip Mounting Platform.Fits the following modelsZodiac Freetalk Pro/Flex 

DKK 979.00
1

Brodit Qi trådløs opladningsholder med kugleled til Datalogic Memor 11 og Datalogic Memor 10 - 718228

Brodit Qi trådløs opladningsholder med kugleled til Datalogic Memor 11 og Datalogic Memor 10 - 718228

#html-body [data-pb-style=K3DR607]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi Wireless Charging Phone Holder with car chargerArt.718228With USB-A cable + car charger with 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. Fits device with Datalogic original RUBBER BOOT (94ACC0193 ).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.With USB-A-cable with car charger for connecting to the vehicle's 12/24V socket. The car charger has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to the Green USB-A port on the power supply unit (Output: 1). The White USB-A charging port (Output: 2) is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 11Datalogic Memor 10

DKK 1249.00
1

Brodit Qi tråldløs aktiv Holder med kugleled til Datalogic Memor 20 - 719233

Brodit Qi tråldløs aktiv Holder med kugleled til Datalogic Memor 20 - 719233

#html-body [data-pb-style=R1PY3CE]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719233With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. Fits device with Datalogic original RUBBER BOOT.Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 20

DKK 1339.00
1

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 11 og Datalogic Memor 10 - 719228

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 11 og Datalogic Memor 10 - 719228

#html-body [data-pb-style=N7WSYDD]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719228With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. Fits device with Datalogic original RUBBER BOOT (94ACC0193 ).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform. Fits for:Datalogic Memor 11Datalogic Memor 10

DKK 1339.00
1

Brodit Qi Trådløs Aktiv Holder med kugleled til Point Mobile PM30 - 719263

Brodit Qi Trådløs Aktiv Holder med kugleled til Point Mobile PM30 - 719263

#html-body [data-pb-style=GXWCUS0]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719263With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform. Fits for:Point Mobile PM30

DKK 1229.00
1

Brodit Qi trådløs Aktiv opladningsholder til Point Mobile PM30 - 718263

Brodit Qi trådløs Aktiv opladningsholder til Point Mobile PM30 - 718263

#html-body [data-pb-style=B4QGNCG]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi Wireless Charging Phone Holder with car chargerArt.718263With USB-A cable + car charger with 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.With USB-A-cable with car charger for connecting to the vehicle's 12/24V socket. The car charger has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to the Green USB-A port on the power supply unit (Output: 1). The White USB-A charging port (Output: 2) is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Attach onto a ProClip mounting platform.Fits for:Point Mobile PM30

DKK 1179.00
1

Brodit Qi Trådløs Aktiv Holder med kugleled til Datalogic Memor 20 - 719232

Brodit Qi Trådløs Aktiv Holder med kugleled til Datalogic Memor 20 - 719232

#html-body [data-pb-style=JBKLXA9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi wireless active holder for fixed installationArt.719232With 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.The holder is to be connected inside the dashboard, providing an elegant installation without any cables hanging over the interior. The charging box has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to (Output: 1) USB-A port on the power supply unit. The (Output: 2) USB-A charging port is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Connect the power cable with a 2A fuse. Professional installation recommended. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 20

DKK 1339.00
1

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 20 - 718232

Brodit Qi trådløs Aktiv opladningsholder til Datalogic Memor 20 - 718232

#html-body [data-pb-style=HR2DDQO]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Qi Wireless Charging Phone Holder with car chargerArt.718232With USB-A cable + car charger with 2 USB-A ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. 5/7.5/10/15W wireless charging. For use with a naked device (not for use with a case).Active holder that charges your device via wireless Qi technology. Keep your phone's battery fully charged, always within easy sight and reach! Neat, discreet and convenient. Customized discreet design with a perfect, firm fit. For use with a naked device (not for use with a case). Qi certified. 5 / 7.5 / 10 / 15W wireless charging. LED charge status.With USB-A-cable with car charger for connecting to the vehicle's 12/24V socket. The car charger has two USB-A ports: QC 3.0A + 2.4A. To ensure your holder works in fast charging modes the cable that connects the holder to the power supply should always be connected to the Green USB-A port on the power supply unit (Output: 1). The White USB-A charging port (Output: 2) is spare and can be used to charge secondary devices such as mobile phones / navigation units. This is a 15W fast charging holder. Fast charging is device dependent.You have full access to the camera and all buttons when the device is in the holder. It is easy to slide the device into place in the holder so it connects to the charging, and to take it out of the holder when leaving the car with a one-hand grip.The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between portrait and landscape mode. Tilts 17° and swivels 360°. 12/24 Volt. Mounting plate 42x50 mm with 4 mm AMPS-holes. Made of high grade black ABS/Acetal plastic. Manufactured in Sweden. Attach onto a ProClip mounting platform.Fits for:Datalogic Memor 20

DKK 1249.00
1

Brodit Rørmount med monteringsplade - 215935

Brodit Rørmount med monteringsplade - 215935

#html-body [data-pb-style=N0PV1F8]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passer rør med en diameter på 25 mm. Skruehuller til montering af holder(M4x12). Til simpel installering af enheder på rør og stænger såsom motorcykler, både, vogne, stande, rullestole, fly etc. Mounten passer til rør med en diameter på 25mm (44,5mm hvis foringen fjernes.)

DKK 851.00
1

Brodit beslag med kugleled til Samsung Galaxy Xcover Pro SM-G715 - 721216

Brodit beslag med kugleled til Samsung Galaxy Xcover Pro SM-G715 - 721216

#html-body [data-pb-style=MHBBIUK]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}MountRail mount for OtterBox uniVERSE case. With USB-cable + cig-plug adapter with 2 USB ports: QC 3.0A + 2.4A. With tilt swivel. 12/24 Volt. Charging via pogo pins. With easy-switch system.Fits the following models:Samsung Galaxy Xcover Pro SM-G715 

DKK 839.00
1

Alfatronix Converter 12V ut, 48V in m. 2m anslutningskabel til Zebra ET50 8.3 Zebra ET50 10.1 - 216240

Alfatronix Converter 12V ut, 48V in m. 2m anslutningskabel til Zebra ET50 8.3 Zebra ET50 10.1 - 216240

#html-body [data-pb-style=XDXO9EO]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Alfatronix Converter 12V ut, 48V in med 2m tilslutningskabel. Passer til:Pepperl+Fuchs Tab-IND 10 Scanner FramePepperl+Fuchs Tab-IND 10Pepperl+Fuchs Tab-IND 08 Scanner FramePepperl+Fuchs Tab-IND 08Zebra ET56 8.4Zebra ET56 10.1Zebra ET55 8.3Zebra ET55 10.1Zebra ET51 8.4Zebra ET51 10.1Zebra ET50 8.3Zebra ET50 10.1

DKK 1149.00
1

Brodit Module Upgrade - Charging Module for fixed installation -216318

Brodit Module Upgrade - Charging Module for fixed installation -216318

#html-body [data-pb-style=L45WAMK]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Lade module til montering på en Module Upgrade holder, sådan så en passiv module upgrade holder kan opdateres til en faststrøms holder hvis dette ønskesModel: 216318 Passer til  module upgrade holderne til Zebra ET40 8 Zebra ET40 10 Zebra ET45 8 Zebra ET45 10  Til  Module Upgrade holdere MED Rugged Boot / Exoskeleton.EAN: 7320282163181

DKK 1089.00
1

Brodit Module Upgrade - Charging Module for fixed installation -216314

Brodit Module Upgrade - Charging Module for fixed installation -216314

#html-body [data-pb-style=N76R7DY]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Lade module til montering på en Module Upgrade holder, sådan så en passiv module upgrade holder kan opdateres til en faststrøms holder hvis dette ønskesModel: 216314Passer til  module upgrade holderne til Zebra ET40 8 Zebra ET40 10 Zebra ET45 8 Zebra ET45 10 Til  Module Upgrade holdere UDEN Rugged Boot / Exoskeleton.EAN: 7320282163143

DKK 899.00
1

Brodit Bordlader til Zebra TC21/TC26 - 216137 - Mobilholder

Brodit Bordlader til Zebra TC21/TC26 - 216137 - Mobilholder

#html-body [data-pb-style=NEJ6LR3]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Start arbejds dagen med en frisk opladet enhed. Med den smarte bordoplader er en utrolig nem og bekvem opladningsløsning til kontor, lager og industri. Enheden er let at placere i holderen og opladningen starter automatisk når den placeres i holderen. Opladnings specifikationer:Input: 100-240VOutput: 5V, 2ARoHS compliant: ROHSCertified: FCC, UL, CE Leveres med stiikkontklader, m.  worldwide adapters inkluderet. Oplader via pogo pins. Passer til nedenstående Zebra modeller:Zebra TC21Zebra TC26

DKK 966.00
1

Brodit Ladestation m. 6 udgange, cigarlader 945080

Brodit Ladestation m. 6 udgange, cigarlader 945080

#html-body [data-pb-style=JGCOGOR]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Smart lade station hvor du kan oplade flere enheder på en gang. Tilslut dit eget ladekabel til enheden for at kunne oplade. 6 X USB-A udgange Dimensioner: 114 x 24 x 84 mm (W x H x D mm)Kabel længde: Længde fra lader til ciggar adapter: 750 mm, + cig-adapter: 60 mm.Vægt: 255g Qualcomm quick Charge 3.0. Input DC 12-24V Output 1: QC: 3.0Output 2: 2.4A

DKK 939.00
1

Brodit Aktiv Holder med cigaradaptor og kugleled til Dolphin 99EX og Honeywell Dolphin 99EX - 530257

Brodit Aktiv Holder med cigaradaptor og kugleled til Dolphin 99EX og Honeywell Dolphin 99EX - 530257

#html-body [data-pb-style=KII50QD]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}The active holder charges your battery when it is in the holder. The charging device connects to the PDA automatically when you put the PDA in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle’s cigarette lighter socket, 12/24 Volt. Attach onto ProClip Mounting Platform.Fits the following modelsDolphin 99EX Honeywell Dolphin 99EX 

DKK 889.00
1

Brodit Passiv Holder til Motorola MC9200, Symbol MC9200, Zebra MC9200 - 216016

Brodit Passiv Holder til Motorola MC9200, Symbol MC9200, Zebra MC9200 - 216016

#html-body [data-pb-style=T96OEDC]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Passive holderArt.216016For all versions with pistol grip, with vibration dampeners.A robust mount for every day professional use in tough environments. Your device is held firmly in place within easy reach, providing a better and safer working environment. Fits all versions of the device with pistol grip. With vibration dampeners which reduce vibrations and chocks.Attach onto a Pedestal Mount. Made of Acetal/ABS plastic. Color: Black. Made in Sweden.Fits for:Motorola MC9200Symbol MC9200Zebra MC9200

DKK 1089.00
1

Brodit Aktiv holder m. cigaradapter Sepura SC2120

Brodit Aktiv holder m. cigaradapter Sepura SC2120

#html-body [data-pb-style=GDJ5MGU]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Aktiv holder med cigarstik opladning Slim design med opladning indbygget i holderen, med kugleled. Praktisk aktiv holder til 2-vejsradio. Med en brodit holder i bilen er radioen altid indenfor rækkevidde og opladt klar til brug. Aktiv holderen har et unikt slim design med ladeboksen integreret i holderen. Holderen er lige til at sætte i bilen cigartænderstik, 12/24 Volt. Vi anbefaler montering på Brodits proclip beslag spoevfikt til den enkelte bilmodel.

DKK 835.00
1

Brodit Faststrøms Aktiv holder Motorola MTX 2500/ MTX 3000 - 985483

Brodit Faststrøms Aktiv holder Motorola MTX 2500/ MTX 3000 - 985483

#html-body [data-pb-style=T7LPTFO]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Fastsrøms holder modelspecifik til Motorola MTX 2500 / MTX 3000 for perfekt pasform. Model: 985483 EAN: 7320289854839Holderen holder 2-vejs radioen opretstående  for bedst mulig forbindelse. Holderen udnytter Delta-V opladnings teknik, Holder giver hurtig opladning. Hver holder er udstyret med sikkerhedstimer, ophednings sensor og LED indikator til at vise opladning. Indikatoren skifter fra rød til grøn vil fuld opladning.Vi anbefaler montering på Brodit Proclips - Du finder vores Proclips her

DKK 809.00
1

Brodit Beslag til Zebra ZD230 Thermal Transfer, Zebra ZD230 Direct Thermal, Zebra ZD220 Thermal Transfer, Zebra ZD220 Direct Thermal - 216252

Brodit Beslag til Zebra ZD230 Thermal Transfer, Zebra ZD230 Direct Thermal, Zebra ZD220 Thermal Transfer, Zebra ZD220 Direct Thermal - 216252

#html-body [data-pb-style=JPYRRFB]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}MountArt.216252Wall mount with MultiMoveClip.This mount offers an easy and secure way to mount your printer on a wall. With quick release MultiMoveClip, it makes it easy to move your printer between locations. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perfect, firm fit.With AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.Fits for:Zebra ZD230 Thermal TransferZebra ZD230 Direct ThermalZebra ZD220 Thermal TransferZebra ZD220 Direct Thermal

DKK 899.00
1

Brodit Beslag til TSC Alpha-3RW - 216073

Brodit Beslag til TSC Alpha-3RW - 216073

#html-body [data-pb-style=KTA60BC]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}MountArt.216073With MultiMoveClip.This mount offers an easy and secure way to mount your printer. With quick release MultiMoveClip, it makes it easy to move your printer between locations. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perfect, firm fit. Attach onto a Pedestal Mount or a high strength ProClip mounting platform.With AMPS-holes. Made of high grade ABS/Acetal plastic. Color: black. Made in Sweden.Fits for:TSC Alpha-3RW

DKK 879.00
1

Brodit Aktiv Holder med cigaradaptor og kugleled til Point Mobile PM45 - 712050

Brodit Aktiv Holder med cigaradaptor og kugleled til Point Mobile PM45 - 712050

#html-body [data-pb-style=MNTRLKY]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}Active holder with cig-plugWith tilt swivel. Fits devices with standard and extended battery.The active holder charges your battery when it is in the holder. The charging device connects to the unit automatically when you put the device in the holder. The holder is attached onto a tilt swivel and can be adjusted in order to avoid light reflection. Connects to the vehicle's cigarette lighter socket, 12/24 Volt. Attach onto a ProClip Mounting Platform.Fits the following modelsPoint Mobile PM45 

DKK 839.00
1