mcb.dk | Få success online

Grundfos 15-14bx pm - Pumpen - 97916772

15-14 BX Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:G 1 1/4port-to-port Length:110 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1.35 Kggross Weight:1.51 Kgshipping Volume:0.003 m3

EUR 292.66

1

Grundfos Up15-14ba pm - Pumpen - 97916757

UP 15-14 BA Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:Rp 1/2port-to-port Length:80 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1 Kggross Weight:1.12 Kgshipping Volume:0.003 m3

EUR 341.40

1

Grundfos Up15-14b pm - Pumpen - 97916771

UP 15-14 B Pmthe High Efficiency Coomfort PM Range is a Product For Domestic Hotwater Recirculation in 1 And 2 Family Houses.The Motor is a Single-phase, 2-pole, Hysteresis, Permanent-magnet Motor in Conformity With The Emcdirective.Characteristics And Benefits:* Unique Autoadapt Saves up to 50% Heatenergy And 87% Motor Energy Compared With a Standard Pump in Continuous Operation* Flushing Function* Automatic Legionella Operation (if Supported From The System)* Automatic Weekend And Vacation Function* Temperature Control Optional* Continuous Operation Optional* Fast And Simple Electrical Installation Due to The Million Times Trusted Alpha Plug* Easy to Clean And Lime Insensitive Spheric Rotor* Application Area up 14°dH Water Hardness* Wearless Operation Due to Liquid Lubricated Bearing* No Leakage Risk Due to a Static Seal* Easy Maintenance And Cleaning by Easy-to-separated Motor Head That Fits on All Standard Circulation Pump Housings* Korrosion Resistant Pump Housing in Brass* Due to Impedance Protected Motor no Motor Protection Necessary* No Additional Installation Costs Due to Integrated Non Return And Stop Valve in The Pump Housingliquid:Liquid Temperature Range:2 .. 95 °Ctechnical:TF Class:95approvals on Nameplate:Vde,GS,Cematerials:Pump Housing:Brass MS 68impeller:Stainless Steel, Epdm, Ppo, Ptfe, Graphitinstallation:Maximum Operating Pressure:10 Barpipe Connection:Rp 1/2port-to-port Length:80 Mmelectrical Data:Max. Power Input:8 Wrated Voltage:1 x 230 Vcurrent in Speed 3:0.07 Acapacitor Size - Run:0.6 Fenclosure Class (Iec 34-5):Ip44insulation Class (Iec 85):Fothers:Net Weight:1 Kggross Weight:1.12 Kgshipping Volume:0.003 m3

EUR 210.26

1

Grundfos Cr3-4 A-a-a-e-hqqe 3x230/400 50hz - Pumpen - 96516592

CR 3-4 A-a-a-e-hqqevertical, Multistage Centrifugal Pump With Suction And Discharge Ports on Same The Level (In-line) Enabling Installation in a Horizontal One-pipe System. The Pump Head And Base Are in Cast Iron - All Other Wetted Parts Are in Stainless Steel. A Cartridge Shaft Seal Ensures High Reliability, Safe Handling And Easy Service And Access. Power Transmission is Via a Split Coupling. Pipework Connection is Via Oval Flanges With Internal Rp Threads.The Pump is Fitted With a 3-phase, Fan-cooled Asynchronous Motor.{br}Liquid:Liquid Temperature Range:-20 .. 120 °Ctechnical:Speed For Pump Data:2873 Rpmrated Flow:3 M3/hrated Head:19.1 Mshaft Seal:Hqqeapprovals on Nameplate:CE,Trcurve Tolerance:Iso 9906:1999 Annex Amaterials:Pump Housing:Cast Ironpump Housing:En-jl1030pump Housing:Astm A48-30 Bimpeller:Stainless Steelimpeller:Din W.-Nr. 1.4301impeller:Aisi 304installation:Maximum Ambient Temperature:40 °Cmax Pressure at Stated Temp:16 Bar / 120 °Cmax Pressure at Stated Temp:16 Bar / -20 °Cflange Standard:Ovalpipe Connection:Rp 1flange Size For Motor:Ft85electrical Data:Motor Type:71aie Efficiency Class:Nanumber of Poles:2rated Power - P2:0.37 Kwpower (P2) Required by Pump:0.37 Kwpower (P2) Required by Pump:0.37 Kwrated Voltage:3 x 220-240 D/380-415 Y Vrated Current:1,74/1,00 Astarting Current:490-530 %Cos Phi - Power Factor:0,80-0,70rated Speed:2850-2880 Rpmefficiency:78,5%Motor Efficiency at Full Load:78,5 %Motor Efficiency at 3/4 Load:79,0-76,5 %Motor Efficiency at 1/2 Load:75,5-71,5 %Enclosure Class (Iec 34-5):55 (Protect. Water Jets/dust)Insulation Class (Iec 85):Fothers:Minimum Efficiency Index, Mei =:0.7net Weight:18.7 Kggross Weight:21.4 Kgshipping Volume:0.05 m3

EUR 1156.23

1

Grundfos Magna3 25-80 Cirkulating Pump 180 mm - Pumpen - 97924246

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1021.76

1

Grundfos Magna3 25-100 Cirkulating Pump 180 mm - Pumpen - 97924247

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1050.67

1

Grundfos Magna3 32-100 Cirkulating Pump 180 mm - Pumpen - 97924257

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1087.78

1

Grundfos Magna3 65-60 f 340 1x230v Pn6/10 - Pumpen - 97924295

Magna3 65-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remote

EUR 4014.27

1

Grundfos Magna3 50-60 f 240 1x230v Pn6/10 - Pumpen - 97924281

Magna3 50-60 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remote

EUR 2578.37

1

Grundfos Magna3 32-120 f 220 1x230v Pn6/10 - Pumpen - 97924259

Magna3 32-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following: Controller Integrated in The Control Box Control Panel With Tft Display on The Control Box Control Box Prepared For Optional Cim Modules Built-in Differential-pressure And Temperature Sensor Cast-iron Pump Housing (Depending on Model) Carbon-fibre-reinforced Composite Rotor Can Stainless-steel Bearing Plate And Rotor Cladding Aluminium Alloy Stator Housing Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features Autoadapt. Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves). Proportional-pressure Control. Constant-pressure Control. Constant-temperature Control. Constant-curve Duty. Max. or Min. Curve Duty. Automatic Night Setback. No External Motor Protection Required. Insulating Shells Supplied With Single-head Pumps For Heating Systems. Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following: Wireless Grundfos GO Remot

EUR 1906.04

1

Grundfos Magna3 25-40n Cirkulating Pump 180 mm - Pumpen - 97924336

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 2019.01

1

Grundfos Magna3 25-60 Cirkulating Pump 180 mm - Pumpen - 97924245

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 757.43

1

Grundfos Magna3 32-60 Cirkulating Pump 180 mm - Pumpen - 97924255

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 993.37

1

Grundfos Magna3 65-120 f 340 1x230v Pn6/10 - Pumpen - 97924298

Magna3 65-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 3863.18

1

Grundfos Magna3 25-40 Cirkulating Pump 180 mm - Pumpen - 97924244

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 781.79

1

Grundfos Magna3 40-120 f 250 1x230v Pn6/10 - Pumpen - 97924270

Magna3 40-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 2406.80

1

Grundfos Magna3 32-80f Cirkulating Pump 220 mm - Pumpen - 98333874

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 1080.75

1

Grundfos Magna3 65-150 f 340 1x230v Pn6/10 - Pumpen - 97924299

Magna3 65-150 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 4502.43

1

Grundfos Magna3 50-120 f 280 1x230v Pn6/10 - Pumpen - 97924284

Magna3 50-120 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 3175.61

1

Grundfos Magna3 25-60n Cirkulating Pump 180 mm - Pumpen - 97924337

Magna3 40-100 Fmagna3 - More Than a Pumpwith Its Unrivalled Efficiency, All-encompassing Range And Built-in Communication Capabilities Plus Functionalities Replacing System Components, The Magna3 is Ideal For Engineers And Specifiers Looking to Create High-performance Systems For Buildings. This Pump in The Grundfos Master Class Will Fit Both Heating And Cooling Applications Perfectly, Making it The Obvious Choice For Almost Any Building Project - Old or New.The Magna3 is of The Canned-rotor Type, i.e. Pump And Motor Form an Integral Unit Without Shaft Seal And With Only Two Gaskets For Sealing. The Bearings Are Lubricated by The Pumped Liquid.The Innovative Clamp With Only One Screw Enables Easy Repositioning of The Pump Head. The Magna3 is a Pump With no Maintenance Requirements And With Extremely Low Life Cycle Cost.The Pump is Characterised by The Following:• Controller Integrated in The Control Box• Control Panel With Tft Display on The Control Box• Control Box Prepared For Optional Cim Modules• Built-in Differential-pressure And Temperature Sensor• Cast-iron Pump Housing (Depending on Model)• Carbon-fibre-reinforced Composite Rotor Can• Stainless-steel Bearing Plate And Rotor Cladding• Aluminium Alloy Stator Housing• Air-cooled Power Electronicsthe Magna3 is a Single-phase Pump.Characteristic Features• Autoadapt.• Flowadapt And Flowlimit (More Than a Pump Function as it Reduces The Need For Pump Throttling Valves).• Proportional-pressure Control.• Constant-pressure Control.• Constant-temperature Control.• Constant-curve Duty.• Max. or Min. Curve Duty.• Automatic Night Setback.• No External Motor Protection Required.• Insulating Shells Supplied With Single-head Pumps For Heating Systems.• Large Temperature Range Where The Liquid Temperature And The Ambient Temperature Are Independent of Each Other.Communicationthe Magna3 Enables Communication Via The Following:• Wireless Grundfos GO Remot

EUR 3039.10

1

Grundfos Scala2 3-45 1x200-240v 50/60hz - Pumpen - 98562862

Grundfos Scala2 is a Fully Integrated, Self-priming, Compact Waterworks For Pressure Boosting in Domestic Applications.Scala2 Incorporates Integrated Speed Control Enabling The Keeping of The Perfect Pressure at The Taps, Meaning That The Pump Performance Will Increase With Increasing Demand.Scala2 Can be Installed in Three Easy Steps:1. Connect The Pipes.2. Prime The Pump.3. Plug The Pump Into The Power Outlet And The Pump Will Start.Grundfos Scala2 Has All The Components Necessaryto Ensure a Comfortable Pressure: Intelligent Controller Integrated Speed-controlled Drive Integrated Tank Integrated Sensors Integrated Non-return Valves.As it is Self-priming, The Scala2 is Able to Pump Water From a Level Below The Pump. Provided it is Filled With Water, The Pump is Able to Lift Water From a Depth of 8 m in Less Than 5 Minutes. This Facilitates Easy Installation And Start-up of The Pump And Provides More Reliable Water Supply in Installations Where There is a Risk of Dry Running And Leakages in Suction Hose or Pipes.If Exposed to Dry Running, Water Shortage or Excessive Temperature, Blocked Pump, For Example in Case of Seizure or Overload, The Pump Will Stop Automatically, Thus Preventing a Motor Burnout.The Pump Features an Automatic Reset Function. In Case of Dry Running or Similar Alarm, The Pump Will Stop. Restarting Will be Attempted Every 5 Minutes 8 Times, There After New Restart Attemps Will Occur Every 24 Hours. The Automatic Reset Function Can be Deactivated.Thanks to Its Hydraulic Design, Permanent Magnet Motor And Water Cooling, The Pump is Extremely Low-noise, 47 dB(A) in Typical Use, Which Makes it Suitable For Indoor as Well as Outdoor Use.Max. Noise Level at Full Load Are 53 dB(A)The Built-in Pressure Tank Reduces The Number of Starts And Stops in Case of Leakages in The Pipe System, Causing Less Wear on The Pump.Scala2 Require no Maintainance, But it is Recommended to Keep The Pump Clean, Check t

EUR 1013.52

1

DIGITAL MARKETING

Marke

Farbe

Händler

Preis (EUR)