4 Ergebnisse (0,12209 Sekunden)

Alle Filter anzeigen

Marke

Händler

Preis (EUR)

Filter zurücksetzen

Produkte
Von
Shops

Grundfos UNILIFT KP 150 AV 1 drainage pump - Pumpen - 011H1900

Grundfos UNILIFT KP 150 AV 1 drainage pump - Pumpen - 011H1900

Unilift KP 150 AV 1 Tauchpumpe Vertikale einstufige Edelstahl-Tauchpumpe mit vertikalem Auslass und integriertem einphasigen Tauchmotor der Isolationsklasse F mit thermischem Überlastschutz. Die Pumpe ist mit einem Saugkorb und einem Tragegriff ausgestattet und wird mit einem 10 mm Netzkabel sowie einem vertikalen Niveauschalter für automatischen Start und Stopp geliefert. Der Laufrad ist ein halboffenes Laufrad für einen freien Durchgang von 10 mm, geeignet zum Pumpen von Grundwasser, Oberflächenwasser, Regenwasser und ähnlichen Flüssigkeiten. Die Pumpe hat eine doppelte Wellendichtung bestehend aus zwei Lippenabdichtungen mit Fett dazwischen. Die Pumpe hat ein Außengehäuse, das durch die gepumpten Flüssigkeit eine kontinuierliche Kühlung des Motors gewährleistet. Der Rotorwellenbetrieb erfolgt in zwei wartungsfreien Kohlenstofflagern, die durch die gepumpten Flüssigkeit gekühlt werden.Der Motor ist gefüllt mit einer ungiftigen Motorflüssigkeit.Flüssigkeit:Flüssigkeitstemperaturbereich:0 .. 50 °CTechnisch:Höchstpartikelgröße:10 mmMaterial:Pumpengehäuse:EdelstahlPumpengehäuse:DIN W.-Nr. 1.4301Pumpengehäuse:AISI 304Laufrad:EdelstahlLaufrad:DIN W.-Nr. 1.4031Laufrad:AISI 304Installation:Pumpenauslass:Rp 1 1/4Maximale Installationshöhe:10 mElektrische Daten:Eingangsleistung - P1:300 WNennspannung:1 x 220-230 VNennstrom:1,3 AKondensatorgröße - Lauf:8 F/400 VSchutzart (IEC 34-5):IP68Isolationsklasse (IEC 85):FLänge des Kabels:10 mTyp des Kabelsteckers : SchukoAndere:Nettogewicht :6,5 kgBruttogewicht :7 kgVersandvolumen :0,013 m3

EUR 412.18
1

Grundfos unilift kp250-m-1 1x220-230v 50hz 10m sch - Pumpen - 012H1300

Grundfos unilift kp250-m-1 1x220-230v 50hz 10m sch - Pumpen - 012H1300

Unilift KP 250 M 1Submersible drainage pumpVertical single-stage stainless steel submersiblepump with vertical discharge port and integratedsubmersible 1-phase canned motor ininsulation class F with thermal overloadprotection. The pump is fitted with a suction strainer, acarrying handle and is supplied with a 10 mmains cable.The impeller is a semi-open impeller for 10 mmfree passage suitable for pumping groundwater,surface water, rain water and similar liquids.The pump has a double shaft seal consisting oftwo lip seals with grease in-between.The pump has an outer casing ensuring continuouscooling of the motor by the pumped liquid.The rotor shaft operates in two maintenance-freecarbon bearings cooled by the pumped liquidThe motor is filled with a non-toxic motor liquid.Liquid:Liquid temperature range:0 .. 50 °CTechnical:Maximum particle size:10 mmMaterials:Pump housing:Stainless steelPump housing:DIN W.-Nr. 1.4301Pump housing:AISI 304Impeller:Stainless steelImpeller:DIN W.-Nr. 1.4031Impeller:AISI 304Installation:Pump outlet:Rp 1 1/4Maximum installation depth:10 mElectrical data:Power input - P1:480 WRated voltage:1 x 220-230 VRated current:2.3 ACapacitor size - run:8 F/400 VEnclosure class (IEC 34-5):IP68Insulation class (IEC 85):FLength of cable:10 mType of cable plug SchukoOthers:Net weight:7 kgGross weight:7.3 kgShipping volume:0.013 m3

EUR 346.08
1

Grundfos up15-14b pm - Pumpen - 97916771

Grundfos up15-14b pm - Pumpen - 97916771

UP 15-14 B PMThe high efficiency Coomfort PM range is a product for domestic hotwater recirculation in 1 and 2 family houses.The motor is a single-phase, 2-pole, hysteresis, permanent-magnet motor in conformity with the EMCdirective.Characteristics and benefits:* Unique AUTOADAPT saves up to 50% heatenergy and 87% motor energy compared with a standard pump in continuous operation* Flushing function* Automatic legionella operation (if supported from the system)* Automatic weekend and vacation function* Temperature control optional* Continuous operation optional* Fast and simple electrical installation due to the million times trusted ALPHA plug* Easy to clean and lime insensitive spheric rotor* Application area up 14°dH water hardness* Wearless operation due to liquid lubricated bearing* No leakage risk due to a static seal* Easy maintenance and cleaning by easy-to-separated motor head that fits on all standard circulation pump housings* Korrosion resistant pump housing in brass* Due to impedance protected motor no motor protection necessary* No additional installation costs due to integrated non return and stop valve in the pump housingLiquid:Liquid temperature range:2 .. 95 °CTechnical:TF class:95Approvals on nameplate:VDE,GS,CEMaterials:Pump housing:Brass MS 68Impeller:Stainless steel, EPDM, PPO, PTFE, GraphitInstallation:Maximum operating pressure:10 barPipe connection:Rp 1/2Port-to-port length:80 mmElectrical data:Max. power input:8 WRated voltage:1 x 230 VCurrent in speed 3:0.07 ACapacitor size - run:0.6 FEnclosure class (IEC 34-5):IP44Insulation class (IEC 85):FOthers:Net weight:1 kgGross weight:1.12 kgShipping volume:0.003 m3

EUR 210.64
1

Grundfos up15-14ba pm - Pumpen - 97916757

Grundfos up15-14ba pm - Pumpen - 97916757

UP 15-14 BA PMThe high efficiency Coomfort PM range is a product for domestic hotwater recirculation in 1 and 2 family houses.The motor is a single-phase, 2-pole, hysteresis, permanent-magnet motor in conformity with the EMCdirective.Characteristics and benefits:* Unique AUTOADAPT saves up to 50% heatenergy and 87% motor energy compared with a standard pump in continuous operation* Flushing function* Automatic legionella operation (if supported from the system)* Automatic weekend and vacation function* Temperature control optional* Continuous operation optional* Fast and simple electrical installation due to the million times trusted ALPHA plug* Easy to clean and lime insensitive spheric rotor* Application area up 14°dH water hardness* Wearless operation due to liquid lubricated bearing* No leakage risk due to a static seal* Easy maintenance and cleaning by easy-to-separated motor head that fits on all standard circulation pump housings* Korrosion resistant pump housing in brass* Due to impedance protected motor no motor protection necessary* No additional installation costs due to integrated non return and stop valve in the pump housingLiquid:Liquid temperature range:2 .. 95 °CTechnical:TF class:95Approvals on nameplate:VDE,GS,CEMaterials:Pump housing:Brass MS 68Impeller:Stainless steel, EPDM, PPO, PTFE, GraphitInstallation:Maximum operating pressure:10 barPipe connection:Rp 1/2Port-to-port length:80 mmElectrical data:Max. power input:8 WRated voltage:1 x 230 VCurrent in speed 3:0.07 ACapacitor size - run:0.6 FEnclosure class (IEC 34-5):IP44Insulation class (IEC 85):FOthers:Net weight:1 kgGross weight:1.12 kgShipping volume:0.003 m3

EUR 343.40
1